Q We are designing a digital camera with ADP5046. The PMU device is powering up and immediately shutting down all outputs. We are not using the external crystal. Do you have an idea how to bring up the supplies? We can communicate via I2C and alter the registers but nothing seems to work. A Refer to the datasheet table 74 on page 56 (copied below). Address 100, bit 0 sets whether channel 8 is in sequencer mode or I2C mode. In this case, for the 0008 version, the default setting is sequencer mode. That means that when EN goes high, channel 8 will startup according to the preset EN delay time and SS time. In your case, the Channel 8 input is not connected. So when CH.8 tries to start, there is no output voltage. The ADP5046 detects this as an under-voltage condition and shuts down. To confirm that this is the problem, I suggest the following: Before setting EN high, program address 100, bit0 to I2C mode. You will have to have I2C powered up and battery voltage applied. I2C mode means that the sequencer is not applied to the channel, rather the channel is disabled by default and can be enabled via I2C. Another option would be to disable the UV delay protection. This is address 101 and can be set to UV disable. If this solves the problem, then I recommend that you connect VBATT to channel 8 input. This should startup normally with no I2C modifications required. There is a version of the part (0012) which has Channel 8 set to I2C mode by default. Attachments: ADP50460008.pdf attachment.pdf ADP5046DefaultSettings-ADP50460012.xlsx

English

EngineerZone

Power Management

Log In

User
Site
Search

OR

Ask a Question

Forums
Popular Forums
Product Forums
View All
Application Forums
Design Center Forums
Learn
Highlighted Webinar

Enabling New Space Missions: Commercial Space Screening Approach for Agile, High-Reliability Payloads
As the Space market evolves and accelerates, mission designers need space-capable electronics that balance performance, reliability, and affordability...
Places
Libraries
Latest Webinars
View All Webinars
Community Hub
Challenge Yourself!
View All
What's Brewing
View All
Places
Resources
View All
Blogs
Highlighted Blogs

Taming the AI Power Storm: Part 2 of 3
Let’s peel back the curtain on how Analog Devices (ADI) is leading the charge, crafting power solutions that not only keep up with AI’s appetite but redefine...

TIA Me Up, But Keep It Stable: Part 2 of 3
Imagine trying to measure a current so tiny that it’s almost invisible. How is that even possible? How do we even convert that current signal into something...
Latest Blogs
Read All Blogs
ADI Blogs
- EZ Spotlight
- The Engineering Mind
ContentZone
Visit ContentZone

ContentZone
Technical articles. Blogs. Videos. Your ADI content, all in one place.

View ContentZone

Featured Content

Featured Content Title
Blurb About Content
View Content By Industry
View Content By Technology