ADM3202 alternatve with swapped CMOS/RS-232 pins?

Question

Accepted Answer

Q 
 I'm using the ADM3202ARUZ circuit in one of my designs. My problem is that I've wired the circuit wrong. The RS-232 level pins (7, 8, 13 and 14) is coupled towards the FPGA instead of the connector and the CMOS level pins (9, 10, 11 and 12) is connected to the connector instead of the FPGA. Do you have a circuit with the same footprint but with the CMOS level pins at 7, 8, 13 and 14, and the RS-232 level pins at 9, 10, 11 and 12 instead? 
 
 A 
 No, I don't believe we have any parts with the same footprint but with the RS232 and CMOS pins swapped around. Unfortunately it looks like you will have to do some board hacks if you wish to debug the board and will have to redesign with the correct pinout.

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Latest Webinars

Challenge Yourself!

What's Brewing

Places

Resources

Highlighted Blogs

Latest Blogs

ADI Blogs

Visit ContentZone

Featured Content

View Content By Industry

View Content By Technology

Products Mentioned

ADM3202: FAQ