Post Go back to editing

Max sink current of LT8606 PG (Power Good) pin

Thread Summary

The user inquired about the maximum sink current of the LT8606 PG (Power Good) pin for discharging remaining voltage after power off. The final answer indicates the PG pin can handle tens of milliamps for short periods, with a maximum DC current between 1 to 10 mA. The pull-down resistance is 600 to 1200 ohms, and the 0.1V test condition is used to measure this resistance, not to limit the current to 83 microamps.
AI Generated Content

Hi,

What is the maximum sink current of LT8606 PG (Power Good) pin? Unfortunately, datasheet does not specify this value. I would like to use PG pin to discharge the remaining voltage after power off.

Thank you.

Sergey.