Board Settings for ADP1046A

I received 100W (ADP1046A-100-EVALZ) EVM board from the local distributor and started powering the board. I have change the output current parameters to 5A instead of 8A and corresponding light loads values are also changed.

Please guide us how to save the board settings after the changes.

Parents
  • I have received the gerber file for ADP1046A from the local analog team and fabricated 5 PCBA for our development and to integrated with our power board. How to program the new ADP1046A IC for default settings and need to change accordingly for my design (LLC topology). Meanwhile i referred AN-1383 app note and at pg.4 it describes as per below

    How to read the register settings file ".46r". 

    Please guide us.

Reply
  • I have received the gerber file for ADP1046A from the local analog team and fabricated 5 PCBA for our development and to integrated with our power board. How to program the new ADP1046A IC for default settings and need to change accordingly for my design (LLC topology). Meanwhile i referred AN-1383 app note and at pg.4 it describes as per below

    How to read the register settings file ".46r". 

    Please guide us.

Children
No Data