Hi All
In the schematic of DC1856B, R22 and R23 are 10ohm but if you open the dsn file you see they are 10Kohm 0603.
Can anybody valid the right value?
from the Application note it is pobalby 10ohm
ThanKs
Ido
LTM4649
Recommended for New Designs
The LTM4649 is a complete 10A high efficiency switching mode step-down DC/DC μModule® regulator in a 9mm × 15mm × 4.92 BGA package. Included in the...
Datasheet
LTM4649 on Analog.com
Hi All
In the schematic of DC1856B, R22 and R23 are 10ohm but if you open the dsn file you see they are 10Kohm 0603.
Can anybody valid the right value?
from the Application note it is pobalby 10ohm
ThanKs
Ido
Hello,
Apologies for the confusion. Both should be 10 Ohms.