Post Go back to editing

Part ID readout mismatch

Category: Datasheet/Specs
Product Number: MAX25089, MAX250

Hello,

we have populated MAX25089 on the PCB. It was verified by visual inspection.

When we read out the part ID via I2C we read #01 which is the ID for MAX25087.

I would expect to read 0x3. Is this correct?

From the data sheet I see:

0x0: MAX25086

0x1: MAX25087

0x2: MAX25088

0x3: MAX25089

Edit Notes

removed incorrect tags
[edited by: ericb at 3:24 PM (GMT -4) on 20 Aug 2025]

Thread Notes

  • This ID bitfield was intended only for internal development use, pre-production when engineering devices were packaged in mass and the top markings were all the same.

    This bitfield should be removed from the datasheet or marked as "RESERVED"

    You can ignore this bitfield for devices in production.

Before You Switch


Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.