We are using Max16150 I am not getting out put voltage once press the button.
I have attached the schematic here PFA
Please support
MAX16150
Recommended for New Designs
The MAX16150 is an extremely low-power, pushbutton, on/off controller with a switch debouncer and built-in latch. This device accepts a noisy input from...
Datasheet
MAX16150 on Analog.com
We are using Max16150 I am not getting out put voltage once press the button.
I have attached the schematic here PFA
Please support
Hi ak29111986,
For how long are you pressing the button? Can you try to disconnect the OUT to LDO_EN, then directly pull up the INT and CLR to the OUT with a resistor and check if there is still no output.
Hi Biancams ,
Switch on is happening. OFF not happening. More than 16s I pressed on the switch.
Hi ak29111986,
Can you probe VCC, PB_INb, INTb and CLRb and then PB_INb, INTb, CLRb and OUT pins?
Please share the captures.
Hi ak29111986,
Can you probe VCC, PB_INb, INTb and CLRb and then PB_INb, INTb, CLRb and OUT pins?
Please share the captures.