MAX17603
Production
The MAX17600–MAX17605 devices are high-speed MOSFET drivers capable of sinking /sourcing 4A peak currents. The devices have various inverting and noninverting...
Datasheet
MAX17603 on Analog.com
LTC7001
Recommended for New Designs
The LTC7001 is a fast high side N-channel MOSFET gate driver that operates from input voltages up to 135V. It contains an internal charge pump that fully...
Datasheet
LTC7001 on Analog.com
Hi everyone,
Does someone know where to find an LTspice Model for a MAX17603. Being new and figuring out where to look for models.
Thankful for any help.
Kind regards
Hi Oneisall,
Moving this to power management.
Depending on what aspects of the driver you want to model, a VCVS often works well, too. I had some issues with the LTC7001 model some time back, here's a writeup of the workaround:
https://wiki.analog.com/university/labs/open_loop_boost_and_buck_adalm2000#appendixgate_divers
-Mark
Hi Mark,
Thank you for your response.
The model is intended to be implemented in a PFC application. A double Boost to be specific.
The Gate Driver should be a dual model with Enable function since ´the line rectification is meant to work with mosfets. So the enable function is supposed to lock one the line rectifer depending of the half cycle.
Kind regards
Understood. You could probably use an LTspice AND gate to model the behavior of the enable function. I'll leave it to an expert in this forum to comment on the availability of an actual LTspcie model for the part.
-Mark