LT3045 output error

Question

Hi, 
 The LT3045 used in my product output abnormal. 
 The 16 pieces of LT3045 was used in my product, which convert the +4.2V to +3.3V. The 16 pieces of LT3094 was used in my product, which convert the -4.2V to -3.3V.. The LT3045 and LT3094 supply power to 128 pieces of AD8336. 
 
 The 11 pieces of LT3045 output -0.58V when -4.2V power was supplied first. The other 5 pieces of LT3045 was normal and output +3.3V. The voltage of &ldquo;SET&rdquo; pin was -0.52V. This error will continue to exist even if +4.2V has been powered on. 
 All the 16 pieces of LT3045 output 3.3V when +4.2V power was supplied first. 
 The 16 pieces of LT3094 is always normal。

ARad · Accepted Answer

Add the Schottky as I indicated in my last post's image. I am not sure why the behavior is not consistent. Part to part behavior may be a little different for this condition. The LT3094 does not require Schottky diodes since its output can be pulled up above ground with no problem.)

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Latest Webinars

Challenge Yourself!

What's Brewing

Places

Resources

Highlighted Blogs

Latest Blogs

ADI Blogs

Visit ContentZone

Featured Content

View Content By Industry

View Content By Technology

Products Mentioned

Thread Details

LT3045 output error