Category: Hardware
Product Number: LTM8061
I tested DC1645A-D(LTM8061 evaluation board) with 6.8kΩ resistor between RNG/SS and GND (IBAT was set to 600mA) and TMR conected to GND(C10 termination).
I attached the charge current, BAT voltage vs time(sec). result.
Looks like C/10 current is 200mA fixed.
Is C/10 fixed to 200mA for C/10 termination even if IBAT is changed via RNG/SS voltage setting.
blueline is for BAT voltage vs time(sec) and redline is for charge current vs time
