Products Mentioned

LT3086 Recommended for New Designs
The LT3086 is a multi-feature, low dropout, low noise 2.1A linear regulator that operates over a 1.4V to 40V input supply range. Dropout voltage at 2.1A...
Datasheet
LT3086 on Analog.com

Associated Drivers

  • State Verified Answer
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 683 views
  • Users 0 members are here
Options
Related 

        

            Post
             Go back to editing
        

    

    


    

    









		












	
	
			
	
			
		
	
	
		

		
About IMON pin of LT3086



		

			

									
					    kshigemori281
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Mar 31, 2022 
				
			
			
		
    

				
		
    
		    		    
		    
		    	
			
    Hi,
    

    Let me ask about LT3086.
    

    I want to use LT3086EDHD without IMON & CDC function. Then I confirmed that CDC pin can float.
    

    Also if I don't use ILIM function that ILIM pin can connect GND that. Then I think IMON can connect to GND in case of IMON&ILIM is same pin. But LT3086EDHD is separated that these pin.
    

    Is it ok that IMON of LT3086EDHD to connect to GND.
    

    Best regards
    
									
			        
		
    

				
						
        

    
    Tags: 
                                            
                 LDO Linear Regulators
                
                                                    
                 lt3086
                
                                                    
                 Positive Linear Regulators (LDO)
                
                                
            
    
    
    

		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    
















    
	
    
	
    
					



			


				
	









	
      
	

    • 
	
      



	
			
		
	



      
	
      
		
      
							FormerMember
					
      
		
      
			
													+1
							
			
				
									FormerMember
							        
			
			
			
    
            
						
                            
            
            				
            
                on Mar 31, 2022 7:48 PM
            
            
					
    
	
    

		
		
    
					
    Hi,
    

    Based on the datasheet, only if the IMON reads 0.8V then it would limit the output current. So grounding this pin should be fine so it always read 0V essentially disabling the pin's function.
    

    

    Regards,
    

    Jhun