Post Go back to editing

LT3080

Hello

I am using LT3080 im my design to supply voltage to the sensor, the recommend is one 100μF bulk capacitor at the
regulator side for the sensor.

Vin:5V

Vout=3.3V

Iout = 300mA

When I change the capacitor output from 2.2uF to 100uF in the simulation the output voltage change from 3.3V to 600mV.,

In data sheet the Minimum Ceramic Output Capacitor is 2.2uF, 100uF capacitor is not recommended? 

Roi