ADP2164 and ADP2164-1.8

Hi,

I am using one of regulator ADP2164 in my circuit to generate 1.8 V from 3.3 V input. unfortunately i mounted ADP2164ACPZ-1.8 instead of ADP2164APZ. As per my circuit i used feedback resistors to adjust and i mounted the which has fixed output voltage. Will it work or not? or will affect to another stages. I attached circuit of my board.

same case about ADP1755 also, this one is used to generate 1.3 V from 1.8 V input.

Regards,

Ravi

Parents
  • Hi,

    Thanks for your reply. Could you please give part marking information about ADP1754ACPZ-1.3-R7 and ADP1755ACPZ-R7. Why because i don't know which part i mounted in my board. How to identify which part is fixed one and which one is variable.

    Please provide part marking for ADP2164 also.


    I didn't get your second point about filters, i used same circuit which you provided in AD-FMCOMMS2-EBZ board.

Reply
  • Hi,

    Thanks for your reply. Could you please give part marking information about ADP1754ACPZ-1.3-R7 and ADP1755ACPZ-R7. Why because i don't know which part i mounted in my board. How to identify which part is fixed one and which one is variable.

    Please provide part marking for ADP2164 also.


    I didn't get your second point about filters, i used same circuit which you provided in AD-FMCOMMS2-EBZ board.

Children
No Data