-ve voltage Rail using LTM8068

Question

Hello, 
 I would like to use LTM8068 for generating -15V. For this, I connected Vout1 to GND. VOUTN and VOUT2 are connected together and output is taken from VOUT2, VOUTN. I am attaching the schematic. Please let me know if the attached design is proper.

ADIApproved · Accepted Answer

Hello 
 The schematic looks good, and GND_CAS1 must be floating compared to GND_CAS. Your message is incorrect in " VOUTN and VOUT2 are connected together".)

Partner Forums

Partner Libraries

Products Mentioned

-ve voltage Rail using LTM8068