ADP2386 footprint

While making a footprint for ADP2386 i have notice, that dimentions in datasheet is wrong

IC side max - 4.1 mm

Pin length max - 0.5 mm

Exp pad max width - 1.5 and 1.05 mm

Pad to pins min gap - 0.2 mm

Pad to pad min gap - 0.45

Make some calculations: 0.5*2+1.5+1.05+0.2*2+0.45=4.4mm

If i place pins in acording to JDEC, gap between pins and exp pads being around 0.05mm, it's impossible

Any suggestions? Maybe official tech support could explain it?