R blank in ADuM4135

For controlling the blanking time, we have to charge the blanking capacitor.

We are supplying the power to blanking capacitor through blanking resistor.

As per the datasheet of ADuM4135, the blanking resistor will be connected to VDD2 . Some application circuits suggested that, we can connect to Vout pin (Pin 14 of ADuM4135) instead of VDD2 .

So if purpose of protection is for the short circuit condition, it is better for using gate line because that protection works only gate turn-on.

Is R blank resistor connected to Vout pin? Is it recommended?

Please suggest.