LTC7815 DC DC buck converter 3 or 4 chanel output

linvshi on Nov 21, 2018

Hi,

Please give me the proper reference. The design requirements： VIN=24VDC( by battery), VOUT1=12v ,Iload1=2.2A, VOUT2=8V, Iload2=2A,VOUT3=5V, Iload3=1A. technology: buck converter, non-isolated.

Top Replies

Mikee_Lacson_00
Nov 27, 2018 +1 suggested
Hi Iinvshi

I would recommend you to use LTpowerCAD VII for your design. As of now there is no model available for LTC7815,

However you can use the one for LTC7812 (buck) for your current need.

Link for…

Parents

0 Mikee_Lacson_00

on Nov 27, 2018 5:11 AM over 2 years ago
Hi Iinvshi

I would recommend you to use LTpowerCAD VII for your design. As of now there is no model available for LTC7815,

However you can use the one for LTC7812 (buck) for your current need.

Link for LTpowerCad:

www.analog.com/.../ltpowercad.html

Regards Mikee
Cancel
Up +1 Down

Reply

Verify Answer

Reject Answer

Cancel

Reply

0 Mikee_Lacson_00

on Nov 27, 2018 5:11 AM over 2 years ago
Hi Iinvshi

I would recommend you to use LTpowerCAD VII for your design. As of now there is no model available for LTC7815,

However you can use the one for LTC7812 (buck) for your current need.

Link for LTpowerCad:

www.analog.com/.../ltpowercad.html

Regards Mikee
Cancel
Up +1 Down

Reply

Verify Answer

Reject Answer

Cancel

Children

No Data