The hibernate threshold current formula on the user guide is not exactly aligned with the actual threshold. This is in our appnote update list of items. Please use the following for the actual case:
In your case for 10mohm sense resistor;
high side sensing threshold: 30mA + user guide formula
low side sensing threshold: 10mA + user guide formula
The full formula will be:
For high side
300(uV)/Rsense(mOhm) + FullCap(mAh)/0.8(h)/(2^HibThreshold)
For example, Rsense = 50mOhm, FullCap = 3000mAh, HibThreshold = 7,
Then threshold current is 300/50 + 3000/0.8/128 = 35.29mA
For low side
100(uV)/Rsense(mOhm) + FullCap(mAh)/0.8(h)/(2^HibThreshold)