RepSOC drops dramatically after 20%

Here is a log showing the behavior. There are 3 full charge/discharge cycles, followed by a charge to 26% SOC (starting 7/15/2025 14:03), then 5 minutes, then discharge. SOC goes from 26% immediately to 2.9%, then falls to 1% for remainder until reaches nVempty (3.00V), then goes to 0%.SOC Drop.zip

Included the config INI file in the zip as well.

Here is a log showing the behavior. There are 3 full charge/discharge cycles, followed by a charge to 26% SOC (starting 7/15/2025 14:03), then 5 minutes, then discharge. SOC goes from 26% immediately to 2.9%, then falls to 1% for remainder until reaches nVempty (3.00V), then goes to 0%.SOC Drop.zip

Included the config INI file in the zip as well.

Hi,

Did you get round this issue? I am trying to use INR21700 cells with Modelgauge m5 and I have various issues like jumping RepSoc or stuck RepSoc. I have tried the LCO and NCA models but it doesn't make much difference. 

Thanks