MAX17853ACB/V+: FAQ

Yes, ADC voltage measurement accuracy increases by cell to ground capacitors instead of Cell to cell filter capacitors in MAX17853/2.

1.Find the maximum current based upon the applications. Check if the current required is below the Maximum rating of MAX17853/52 (ie 300 mA). 2. Select the Rbalance based on the formula Vmax_cell …

No, SPI communication is possible only for single MAX17853/2. In series daisy connection of MAX17853/2, grounds are at different voltage levels as shown in below figure, hence SPI cannot be used for…

No, the correct connections are MISO to SDO and MOSI to SDI.

The recommended RDCIN is RES; SMT (1206); 100; 1%; +/-100PPM/DEGC; 0.25W. An example is RMCF1206FG100R

The drivers provided with software for MAX17853 Evaluation Kit are supported for both windows 7 and XP. Check if the MAX17841EVMINIQUE board is autodetected on either of those systems (it may be detected…