Supervisors & Resets

ADM1186: FAQ

Q I have a question about ADM2483. Would you please help me with it. I found that ADM2483 has a PV input pin and ADM809 is recommended to drive this pin. My question is, if I don't want to…

Q How should I connect Power Valid Pin (PVP) when not using it? A The ADM2483's Power Valid Pin (PVP) should be pulled high, if not used

To identify the faulty monitoring channel, following register settings should be done in MAX14046’s configuration: Register 0x5Dh (EEPROM lock register) should be set to 0x00. This register setting enables…

To identify the faulty monitoring channel, the following register settings should be done in the MAX16046’s configuration area: a. Register 0x5Dh (EEPROM lock register) should be set to 0x00. This register…

In MAX16046, different voltage thresholds such as Undervoltage, Overvoltage or Early-Warning are set for each monitoring channel. If the monitoring channel’s input voltage violates any of the above mentioned…

In the MAX16046, different voltage thresholds such as Undervoltage, Overvoltage, or Early Warning are set for each monitoring channel. If the monitoring channel’s input voltage violates any of the above…

It is not recommended to directly connect the VCC supply to the UP pin (ADM1186-1) or the UP/DOWN pin (ADM1186-2) to initiate sequencing when power is applied. When the UVLO (Undervoltage Lockout) circuit…

MAX6369: FAQ

MAX6412: FAQ