Any MAX77812 can be used in a 2+2 configuration based on the settings of PH_CFGx. MAX77812 with a 2+2 phase configuration is used, PH1 and PH3 are the master phases. PH2 is the slave phase controlled by…
If the pins corresponding to the unused buck are left floating, then the buck converter will attempt to regulate and LX_ will try to switch. The MAX77812 will then draw 30mA of current. The reason for…
In a phase combined configuration, only the master phase registers are active. The slave phase registers are ignored. In a 2+2 configuration, M2_VOUT and M4_VOUT are ignored, and the rail1 (Phase 1+ Phase…
Only references mentioned on the product page and/or datasheet as future products are valid references. Please ignore that P1, P2 based part numbers as they are for Maxim internal purposes.