Q: The microcontroller in my system is powered by the MAX77714, and thus cannot program any changes to the MAX77714 operating conditions until after startup. Is there any nonvolatile memory I can program…
The output voltages for the Buck regulators and LDOs can be OTP programmed to any value listed in the SDx_CNFG1 registers. The output voltages for the LDOs can be OTP programmed to any value listed in…
The data sheet doesn't specifically say what to do with the unsued inputs and outputs DC/DC ports (SDx) of MAX77714. However, you can leave unused DC/DC ports floating.
The internal silicon oscillator can be used if the customer does not want to use an external crystal oscillator. XIN and XOUT can be left floating if unused.
