MAX34451ETNA1+: FAQ

Was this helpful?

Question about programming (configuring) the MAX34451ETNA1+

MAX34451 and MAX34463 have the same programming specification. There have been some FW updates for MAX34451ETNA1+ so moving forward, please use MAX34451ETNA2+ instead.
What is MAX34451 SMBUS ADDR pin spec? have that tolerance spec? Can that to use 221Kohm(1%) instead of 220Kohm?

1kohm deviation at 220kohm is certainly within the allowable region. The ADDR pin has a tolerance of +/-10% for a recommended resistor value.
What is the input voltage range of MAX34451 analog inputs?

The maximum voltage that can be monitored on each of the 16channels of the sequencers is 32.767V. For voltages>1.8V the customer would need to use a resistor divider since the recommended full scale ADC…