If the supply of MAX17651 or LDOs in general drops below the output voltage, the bypass cap of the LDO will discharge via the body diode of the power FET. This can severely impact the behavior of the LDO…
If the output voltage is less than 1.8V, use a low-ESR 10µF (min) 0805 ceramic output capacitor for good load transient response. If the output voltage is greater than or equal to 1.8V, use a low-ESR 4…
Question description:
MAX17651 is still working when the EN pin is left floating, even after power cycle. It will stop working when EN pin is touched with multimeter probe when we tried to measure the…
