MAX17292ETCF+: FAQ

MAX17292ETCF+: FAQ
  • Created
Was this helpful?
  • Can the MAX17292 work below 4.2V Vin?

    The device is marketed as "2.5V to 36V, 2.5MHz, PWM Boost Controller" but it does not turn on with any voltage below 4.2V The MAX17290/MAX17292 high-efficiency, synchronous step-up DC-DC controllers…
  • How to use an external clock for the MAX17292

    To synchronize the converter with an external clock, connect a logic signal in the range 1000kHz to 2500kHz to the FSET/SYNC input. The external nMOSFET is turned on (i.e., DRV goes high) after a short…