Designing a flyback converter with a high-voltage output presents unique challenges. For a detailed guide on creating a 1000 V output, no-opto isolated flyback converter, refer to the following technical…
The external transformer that will isolate the primary side from the secondary side (output) will determine the isolation strength.
Please see recommended transformers on pg 13 of the datasheet…
During the LT8304-1’s internal 11 ms soft-start period, the controller checks whether the voltage across the external ground-referred reference resistor (RREF) exceeds a threshold—typically 0.6 V, which…
The LT8304 has a minimum load requirement to ensure accurate output voltage is being feedback to the controller. The LT8304 samples the isolated output voltage from the primary-side flyback pulse waveform…