This inquiry is aimed towards the x-microwave folks, not ADI folks. I am an ADI applications engineer, focusing in RF applications.
I'd like to experiment with receive signal chains using the x-microwave tools. We've been experimenting with image reject mixer receive architectures, using two mixers and a 90 degree hybrid as the combiner on the IF side. The only ADI mixer I see is the HMC557 (2.5GHz to 7GHz mixer), which will do fine for starters, but I'm also looking for an ADI PLL in the x-microwave portfolio. In order to achieve the image rejection, I need to generate quadrature LO's, so need to have two PLLs (whatever they may be) and the ability to program their phase.
Is the HMC557 the only ADI mixer available in the x-microwave tools, and do you have a PLL available to generate a 2.5GHz to 7GHz LO?
Thanks for your interest in ADI products on our X-Microwave format.
There are a broad range of ADI parts that are being designed in at the moment and quite a few that are already designed that…
I work in the Partners program with Andy, you and I should definitely talk some time. I'd like to try some different signal chains with x-microwave components and do some write-ups.
I'm having some trouble with your website right now, but very often things are right in front of me and I don't see them. When I look at your selection tables, it looks like they are categorized by the x-microwave part number. However, if I'm looking to see if a component from a particular vendor is available in one of your modules, it doesn't look like I can search by that.
Specifically, I'd like to use the ADRF5355, also looking for an ADI mixer in your portfolio that runs in the 5GHz to 15GHz range. I know that a lot of these type of mixers require a lot of LO power, so will likely need an ADI RF amp that can drive 10-15dBm. Can you help me with the component search issue (probably something very obvious that I'm not seeing.