Issue in implementation of HDL verilog codes after run in VIVADO 2021.1

Has the radio carbon project been modified? If so, how?

we just downloaded verify files from the git hub using the path  and made a project using those Verilog file with device package of Xczu3cg-sbva484-1-e.  The project was succeeded in synthesis but failed in Run Implementation. We have used VIVADO 2021.1 tool for compiling the project.

The required  inputs and screenshots were provided in the previous post for your kind reference to support and rectify the issue faced.   We are waiting for your valuable support and reply.

Try using the makefiles included in the project.

We have a tutorial for building source here: https://github.com/NextGenRF-Design-Inc/bytepipe_sdk/blob/main/src/rflan/README.md#building-source

More of our video tutorials are here: https://www.youtube.com/playlist?list=PL1O6z4HXixy3uAJCNkjg2Hvm9Dcu4XAUr

Don't worry if the instructions use the name "bytepipe_sdk" because that's the underlying software project for radiocarbon. 

Sir we executed following commands

cd c:
git clone https://github.com/NextGenRF-Design-Inc/bytepipe_sdk.git   ---HERE WE NOT CLONED WE DOWNLOADED THE LATEST VERSION bytepipe_sdk-12.08.22
cd bytepipe_sdk/
mkdir workspace
cd workspace/

export PATH=/cygdrive/c/Xilinx/Vivado/2021.1/bin/:$PATH
make -f ../src/rflan/Makefile hdl

it get started building adrv9001 programmable logic and then it entered into building  axi_dma but got some error , screenshots of error is attached for your reference.

Please do the needful.

I just built this repo and it did just fine.

Maybe something else is wrong:

Suggestions for troubleshooting:

• look through src files to see if Makefile actually exists
  • Might as well check if all files called by the makefile exist
• Before unzipping, check "unblock" found in the properties menu of the zipped folder you downloaded from github.
• 

I should clarify that I built the HDL from the zipped & downloaded repo like you are doing.

Could you send the entire output of the make command?

Im curious to see why the adrv9001 HDL driver gets built but not the axi_dma HDL.

Sir i started freshly from initial steps by cloning .git repo from github "https://github.com/NextGenRF-Design-Inc/bytepipe_sdk". and screenshots location of files is shown below:-

Then we followed all commands to build hdl and screenshots are attached for your reference below:-

In building axi_dma we got same error as previous what i mentioned before.

Please do the needful.

I've tried recreating this issue, but it's not showing itself...so we need to dig deeper

For each occurrence of "No such file or directory" after "Building axi_dma", please manually check that the associated files exist

If they do exist, then we might have to look into changing permissions. If they don't, then we have an issue happening between github and your computer.

Sir we tried today building with MINGW64 and not by CYGWIN64 terminal we got some Ok conditions  with upack2_ip and cpack2_ip but still some error is there but better than previous build which was done by cygdrive cygwin terminal.

Please do the needful.

Sir we tried today building with MINGW64 and not by CYGWIN64 terminal we got some Ok conditions  with upack2_ip and cpack2_ip but still some error is there but better than previous build which was done by cygdrive cygwin terminal.

Please do the needful.

some more screenshots are attached for your reference. This we got by building through MINGW64 terminal today.

we are able to get these files in workspace folder by executing those commands in MINGW64 but not in cygwin64.

We are getting no files inside axi_dma when we run in cygwin64 terminal.

I can't seem to replicate your issue.

Try using bytepipe_sdk  .zip folder from git again

• download
• unblock zip folder commends like mentioned in my september 25th reply
• unzip to the C: drive so that the src folder is two folders down from the C: Drive (C:/bytepipe_sdk/src/...)
• source vivado tools
• make hdl

If that doesn't work, then the axi_dma cloning process is probably still breaking your build. Perhaps you're having permissions issues when cloning content from a network location

Sir we tried what you told in above reply but getting stuck at same place i.e when we building axi_dma.

This sh file was provided in bytepipe_sdk in axi_dma folder which i opened through notepad. In this  middle two commands for upack2 and cpack2 we are getting OK conditions as you can see in above screenshot but adi_ip_xilinx.tcl and axi_dmac xilinx are not getting build properly and some error are coming which you can see in above screenshot.

But these all files are getting cloned from the same path github repo only hdl_2021_r1 is used instead of what is highlighted in this notepad screenshot.

Please do the needful.

I looped in some other team members to look at this issue. They are going to set up a clean build environment with freshly downloaded tools. Hopefully, this will get closer to replicating your environment and reveal similar problems.

I'll let you know their results.

Ok Thankyou Sir.

But today morning we came and tried again by doing some changes as u mentioned above and some modification from our side by setting those paths and environment variables we successfully able to build all the files and at last able to get .xsa file 

Screenshots are attached 

Further in future if your support and guidance is required will come to you sir.

Sir we started building the rflan sw after successfully building hdl  but we got the following errors:

cp: cannot stat '/cygdrive/c/bytepipe_sdk/workspace/rflan/rpu_system/Debug/sd_card': No such file or directory
cp: target '/cygdrive/c/bytepipe_sdk/workspace/rflan/sd_card' is not a directory
cp: cannot stat '/cygdrive/c/bytepipe_sdk/workspace/rflan/rpu/Debug/rpu.elf': No such file or directory
cp: cannot stat '/cygdrive/c/bytepipe_sdk/workspace/rflan/rpu/Debug/rpu.elf.size': No such file or directory
cp: cannot stat '/cygdrive/c/bytepipe_sdk/workspace/rflan/rpu_system/Debug/sd_card/BOOT.BIN': No such file or directory
zip warning: name not matched: rflan/sd_card/

zip error: Nothing to do! (try: zip -rj /cygdrive/c/bytepipe_sdk/workspace/rflan/rflan_xczu3cg-sbva484-1-e_sdcard.zip . -i rflan/sd_card/)
adding: fsbl_a53.elf (deflated 68%)
adding: pmufw.elf (deflated 61%)
adding: rflan_xczu3cg-sbva484-1-e.xsa (deflated 6%)

we followed this video also, but in the place of last two commands shown in video screenshot we are getting above errors and not getting rflan/sd_card folder.

Please do the needful.

Sorry for the delay. I was on vacation Monday and Tuesday of this week.

Could you check C:/bytepipe_sdk/workspace/rflan to see if you have a file named "rflan_xczu3cg-sbva484-1-e.xsa"?

Attempting to build "sw" with rflan_xczu3cg-sbva484-1-e.xsa missing from C:/bytepipe_sdk/workspace/rflan produced similar errors for me.

Ok no problem sir .

This is my another account login. 

"rflan_xczu3cg-sbva484-1-e.xsa" this file is already present in the same path or directory as you mentioned above.

we executed building rflan sw but got some error regarding sdcard related.

screenshots are attached for your reference.

Please do the needful.