Blogs

We'll be there to run learn to solder sessions using Audio Builders Workshop metronome kits, talk about audio and resistors, and show off the SHARC Audio Module, A2B, and Clockworks' SignalBlox modular open source hardware for signal processing.&nbsp...

Hitting the test bench soon, this adapter board allows upcoming SignalBlox® modules like the A/D and D/A boards to be used to add more I/O to an A2B® system.  Part of the release package will include support for use with the  A2B in...

Recently ADI was kind enough to allow the Clockworks A2B® module to be placed on the same test fixture as used in developing the guidance contained in ADI's EE-369: Eye Diagram Measurement for AD242x A2B® Transceiver-Based Systems. (note ...

A2B® was developed for use in unshielded enclosures with unshielded cable in an environment where emissions are highly regulated by the automotive manufacturers to ensure that sensitive RF electronics are not unintentionally degraded by unintende...

Amid 500 drum sets joined by 1000 electric guitars, Clockworks Signal Processing set up a small demonstration area in the Analog Devices meeting room of the A2B® modules and EVM along with some prototype hardware of the SignalBlox® product li...

Systems built using Analog Devices' Automotive Audio Bus® (A2B), SHARC® Audio Module, and Clockworks SignalBlox® product line will almost certainly have analog inputs and/or outputs. Those interfaces need to deliver specific real world pe...