Post Go back to editing

Simulation software and a library for ADN3000-06 ic

I am a university student doing my final year university project.Part of My project is to design a fiber optic receiver.I am employing Analog devices ADN3000-06-50A-PT7 ic for this purpose.I am encountering several issues with the ic ...

1) First question i have is this ic is in die form,therefore it is hard to solder for undergraduates like us.So do you have this ic as a chip with a package?


2)Do you have footprints available for this ic,if so please guide me how to get a footprint?

 

3)I am planning to design the application for about 3Gbps.I have to design circuit and simulate by a software first.What is the simulation software that can be used for a RF design like this?Does Analog devices has a library created for ADN3000-06 ic for this simulation software?

 

I would be really grateful for your supports to fix my above mentioned issues...

Thank you

  • I’m sorry. Questions on these devices (products with ADN7XXX part numbers) are not  handled on Engineerzone and should be directed to your local application/sales support organization.

    Sales Support: (http://www.analog.com/salesdir/continent.asp).

    Tecnical Support: (http://www.analog.com/en/content/technical_support_page/fca.html)

  • Dear Enash,

    I am sorry to read your question after 4 year later.

    If you still follow up our EZ, here are my comments to your questions:

    1) First question i have is this ic is in die form,therefore it is hard to solder for undergraduates like us.So do you have this ic as a chip with a package?

    ADN3000-06 is an integrated receiver, capable of 6.5Gbps. We offer it in die form only. Unfortunately, unless you have right lab equipment, it is difficult for a student like you to evaluate the die product as is.

    2) Do you have footprints available for this ic,if so please guide me how to get a footprint?

    We had discontinued ADN3000-06 product long time ago. Do you still interest in this product and its footprint?

    3)I am planning to design the application for about 3Gbps.I have to design circuit and simulate by a software first.What is the simulation software that can be used for a RF design like this? Does Analog devices has a library created for ADN3000-06 ic for this simulation software?

    It is smart to ask for a model for this high speed device. Unfortunately, we have no such model for simulation tool.

    Our potential customers are industry professionals, they know how to bond this tiny device in their ROSA for proper evaluation. You must know how now.

    The point is, simulation tool could give you some product behaviors estimation, per adopted simulation algorithms.

    The real product behavior, especially for high-speed products, is always way out of simulation estimation. People continue to work hard, invest money and time, to minimize this discrepancy.

    One advise: unless you know what you are doing, and the feasibility scale of simulation tool, please always question the simulation result first.

    Best Regards,

    Dongfeng

  • This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
    EZ Admin