MAX32660-EVSYS#: FAQ

Created over 7 years ago

Was this helpful?

Do customer need to utilize the Eclipse IDE for Maxim's ARM-based Darwin microcontrollers?

No. Customers can also install the standard GCC command-line tools to compile their firmware.
Does Maxim have a µC-IDE for Darwin µC running on Linux?

No. Maxim does not provide an IDE for Linux. Nevertheless, customers can easily make use of the standard ARM-GCC environment and -GDB toolset as well as openocd and compile firmware for their board under…
Does the MAX32660-EVSYS contain a socket for the MAX32660?

No, the MAX32660 (20 pin TQFN) is soldered to the MAX32660-EVSYS board.
Does the MAX32660-EVSYS include a MAX32625PICO board?

Not exactly. The MAX32660-EVSYS does not include the MAX32625PICO board, but instead contains virtually the same circuitry of the PICO board directly on the EVSYS board, eliminating the ribbon cable.
Is there a Bluetooth BLE radio on the MAX32660-EVSYS?

No, there is no Bluetooth radio on the MAX32660-EVSYS.
Is there a Keil Device Family Pack (DFP) for the MAX32660?

Yes, there is a DFP available for the MAX32660. It can be found at the following link*: http://www.keil.com/dd2/maxim/max32660/ To use the MAX32660-EVSYS with the Keil IDE, you will need to change…
What is the Eclipse error when debugging: error (193)?

When trying to debug your project you might run into the following error Error in final launch sequence Failed to execute MI command: -exec-run Error message from debugger back end: (193) To fix…
When I measure the Deep Sleep current on the MAX32660, I measure higher than the datasheet value. How can I verify the datasheet value?

When measuring supply currents in the single digit microamperes (uA), it is important to inspect the board schematic for external loads including pull up resistors. For example, if using the MAX32660-EVSYS…
Which package variant of the MAX32660 is used on the MAX32660 EVSYS?

The MAX32660 EVSYS features the 20 pin TQFN version of the device, MAX32660GTP+.
Why do I have a MAX32660EVSYS UART_ReadAsync callback error -9 in the example code?

If you are using Eclipse IDE and might several instances of it in your machine, please re-install the toolchain, since you might have a conflict between versions.

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Upcoming Learning & Events

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

Forums

Learn

Community Hub

ContentZone

MAX32660-EVSYS#: FAQ

Do customer need to utilize the Eclipse IDE for Maxim's ARM-based Darwin microcontrollers?

Does Maxim have a µC-IDE for Darwin µC running on Linux?

Does the MAX32660-EVSYS contain a socket for the MAX32660?

Does the MAX32660-EVSYS include a MAX32625PICO board?

Is there a Bluetooth BLE radio on the MAX32660-EVSYS?

Is there a Keil Device Family Pack (DFP) for the MAX32660?

What is the Eclipse error when debugging: error (193)?

When I measure the Deep Sleep current on the MAX32660, I measure higher than the datasheet value. How can I verify the datasheet value?

Which package variant of the MAX32660 is used on the MAX32660 EVSYS?

Why do I have a MAX32660EVSYS UART_ReadAsync callback error -9 in the example code?

Before You Switch