Category: Software
Product Number: EVAL-ADICUP360
Software Version: CrossCore Embedded Studio 3.0.1
I tried to follow the guide for an example demonstration, but when I dragged BIN directly into MEBD and opened the serial tool, clicking the enter key did not produce any response, and there was no fail file in MEBD. When I clicked the keyboard, the indicator light on the development board would flash along with it. I don't know what the problem is. I used CrossCore Embedded Studio to run the project, but there was no response. I want to know how to solve it, as it will produce the results in the guide. I am currently in a hurry and hope to reply soon
when I run this project in CrossCore Embedded Studio will appear these informations as follows
Open On-Chip Debugger (Analog Devices 3.0.1-50) OpenOCD 0.10.0 (2024-03-18-14:55)
Licensed under GNU GPL v2
Report bugs to <processor.tools.support@analog.com>
0
Info : auto-selecting first available session transport "swd". To override use 'transport select <transport>'.
cortex_m reset_config vectreset
adapter speed: 2000 kHz
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : CMSIS-DAP: SWD Supported
Info : CMSIS-DAP: FW Version = 1.0
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1
Info : CMSIS-DAP: Interface ready
Info : clock speed 2000 kHz
Info : SWD DPIDR 0x2ba01477
Info : DAP aducm360.cpu DPIDR indicates ADIv5 protocol is being used
Info : SWD DPIDR 0x2ba01477
Info : aducm360.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : starting gdb server for aducm360.cpu on 3333
Info : Listening on port 3333 for gdb connections