Redirecting Pins via software

Question

AN-798 Appendix C shows sample code (about 10 lines) of how to redirect the output of the PWM to a different pin. We have tried this with limited success. The PWM output goes to the new pin but stays active on the original pin as well. We do not understand the behind the scenes coding. Can you, who are close to this, help us get a lot smarter? Thanks!

PhotoQSLs · Accepted Answer

Hello Karl, 
 Thank you for your response! Unfortunately, it is about a year late. We have leaned how to access the PWM and have used it successfully. Merry Christmas and thanks again! 
 Kind regards, 
 Lee)

Karl.O · Answer

Hi, 
 The sample code is using the Programmable Logic Array (PLA) feature of the device. This feature can be used to route pins to a different pin. 
 The ADUC7021 doesn't have the PWM pin exposed, so the PLA feature is used to route the PWN signal to other pin. 
 Regards, 
 Karl

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Latest Webinars

Challenge Yourself!

What's Brewing

Places

Resources

Highlighted Blogs

Latest Blogs

ADI Blogs

Visit ContentZone

Featured Content

View Content By Industry

View Content By Technology

Products Mentioned

Thread Details

Redirecting Pins via software

Thread Summary

Thread Notes