AD9371.H

Please download the software package from the below link and check the path below for mykonos.c ,mykonos.h files.

https://www.analog.com/en/lp/001/transceiver-evaluation-software.html

PrakashRP said:

am trying to set custom Tx frequencies each time with the setup.

You can use setRfPllFrequency() API to set the RF PLL frequency.

Thanks for the reply.

With this setRfPllFrequency(), will i be able to change the frequency dynamically from sdk ? when the target is available using console/TCL command?

Yes, we can change the frequency during  runtime. Keep the radio in OFF state and then set the desired RF PLL frequency.

Link.Mykonos.radioOff()

Link.Mykonos.setRfPllFrequency(Link.Mykonos.PLLNAME.TX_PLL, 100000000)

Link.Mykonos.radioOn()

rfpll=Link.Mykonos.getRfPllFrequency(Link.Mykonos.PLLNAME.TX_PLL,1)
print rfpll

Thanks for the reply ,

some more clarification needed, whenever i am taking no os repositiory's/ mykonos api library files and source it into sdk even though the files are available it is showing as mykonos.h not found , or sometimes mykonosdbjesd.h not found . 

Regards,

Prakash

Can you please share us the error that you are getting while trying to port the no-OS to sdk?

https://wiki.analog.com/resources/eval/user-guides/mykonos/no-os-setup

Thanks for the reply,

I am getting the error as "no such file found" for each of common.c,common.h,mykonos.h, so on for all the realted library files and .c files (even though i have sourced entire src directory ). If i keep on adding the files one by one again the error increases.

Thanks for the reply,

I am getting the error as "no such file found" for each of common.c,common.h,mykonos.h, so on for all the realted library files and .c files (even though i have sourced entire src directory ). If i keep on adding the files one by one again the error increases.

Can you pls crosscheck if the path to your workspace is correctly included in the sdk environment?

Are you following the procedure explained in the below link properly.

https://wiki.analog.com/resources/eval/user-guides/mykonos/no-os-setup#ad9371ad9375_no-os_setup

Thanks I have tried the above too. But still getting error.

Can you please share the complete snippet of the SDK folder ?