calibration error 5E,0x80

Hi Parasantidrone ,

It is recommended that you use the main branches for both no-OS and HDL. Below is the output for the sample project (with Vitis 2022.1; 2021.1 should also be fine):

cf-ad9361-lpc: Successfully initialized (61439514 Hz)
ad9361_init : AD936x Rev 2 successfully initialized
cf-ad9361-dds-core-lpc: Successfully initialized (61441040 Hz)
DMA_EXAMPLE: address=0x141050 samples=65536 channels=2 bits=16
Done.

The modifications that were made to the project are:

1. set AD9364_DEVICE in https://github.com/analogdevicesinc/no-OS/blob/2c4d7b8ec3fb4af4bf3ce430d5e2dc2777e143b6/projects/ad9361/src/app_config.h#L45-L46

2. enable DMA_EXAMPLE in https://github.com/analogdevicesinc/no-OS/blob/2c4d7b8ec3fb4af4bf3ce430d5e2dc2777e143b6/projects/ad9361/src/app_config.h#L56

Regards,

George

Hi Danmois,

 we have tried this settings still it is not working ,can u kindly share the link of no-os code for ad9364 using zed board .

kindly help.

with regards,

Parasantidrone

Hi Parasantidrone ,

no-OS project https://github.com/analogdevicesinc/no-OS/tree/main/projects/ad9361

HDL project https://github.com/analogdevicesinc/hdl/tree/main/projects/fmcomms2/zed

Regards,

George

we are able to intialise the board and the link for the screenshot of the console commands is attached .But we are not able to see the out put at the ports.The Tx and Rx are set as defaults.Kindly help

https://drive.google.com/file/d/1zwaEZVD6cugCd0FgV864yTuSJaoYdml5/view?usp=drive_link

Hi Parasantidrone ,

You can follow the steps listed at the following address: https://wiki.analog.com/resources/tools-software/no-os-software/iio

This way you will be able to control the output using IIO Oscilloscope.

Regards,

George

Hi Parasantidrone ,

You can follow the steps listed at the following address: https://wiki.analog.com/resources/tools-software/no-os-software/iio

This way you will be able to control the output using IIO Oscilloscope.

Regards,

George

what is the default tx and rx frequency when the board is initialsed.is it 2.4Ghz?

Hi Parasantidrone ,

This is set in the init structure:

https://github.com/analogdevicesinc/no-OS/blob/2c4d7b8ec3fb4af4bf3ce430d5e2dc2777e143b6/projects/ad9361/src/main.c#L221

Regards,

George

Thank you so much the default frequency for 2.4 Ghz is working .Now if we have to change the frequency what are the parameters that we need to change in code .

regards,

Parasantidrone.

HI Parasantidrone ,

You can find more detailed information on the product page and on the related Wiki pages:

https://www.analog.com/en/products/ad9364.html

https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz/software/baremetal

As the initial problem has been solved, please mark as Verified the correct answer and open a new thread for any new issue.

Regards,

George