Hello,
I am using ADRV9364z7020 with vivado 2019.1 and HDL_2019_R2 + No-OS-2019_R2 . I am able to build both hdl and no-os projects. I am working on example projects. When I use DAC_DMA_EXAMPLE project, I can change frequency and all the other things properly but. RF output level is very low. As you can see on the picture max. -59 dBm. I also generated a single tone using iio oscilloscope with Linux-OS and I measured RF power level around 8dBm. So I believe that I need to change tx attenuation value. You can find main.c and app_config.h files attached. I also tried changing attenuation value manually like ad9361_set_tx_attenuation(ad9361_phy,0,10000), bu it does not change anything.
/***************************************************************************//**
* @file ad9361/src/main.c
* @brief Implementation of Main Function.
* @author DBogdan (dragos.bogdan@analog.com)
********************************************************************************
* Copyright 2013(c) Analog Devices, Inc.
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of Analog Devices, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* - The use of this software may or may not infringe the patent rights
* of one or more patent holders. This license does not release you
* from the requirement that you obtain separate licenses from these
* patent holders to use this software.
* - Use of the software either in source or binary form, must be run
* on or directly connected to an Analog Devices Inc. component.
*
* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
/******************************************************************************/
/***************************** Include Files **********************************/
/******************************************************************************/
#include <inttypes.h>
#include "app_config.h"
#include "ad9361_api.h"
#include "parameters.h"
#include "spi.h"
#include "gpio.h"
#include "delay.h"
#ifdef XILINX_PLATFORM
#include <xparameters.h>
#include <xil_cache.h>
#include "spi_extra.h"
#include "gpio_extra.h"
#include "irq.h"
#include "irq_extra.h"
#endif
#ifdef LINUX_PLATFORM
#include "linux_spi.h"
#include "linux_gpio.h"
#endif
#include "axi_adc_core.h"
#include "axi_dac_core.h"
#include "axi_dmac.h"
#include "error.h"
#ifdef IIO_SUPPORT
#include "iio_axi_adc.h"
#include "iio_axi_dac.h"
#include "iio_ad9361.h"
#include "uart.h"
#include "uart_extra.h"
#include "xil_cache.h"
#endif // IIO_SUPPORT
/******************************************************************************/
/************************ Variables Definitions *******************************/
/******************************************************************************/
#ifdef XILINX_PLATFORM
struct xil_spi_init_param xil_spi_param = {
#ifdef PLATFORM_MB
.type = SPI_PL,
#else
.type = SPI_PS,
#endif
.flags = 0
};
struct xil_gpio_init_param xil_gpio_param = {
#ifdef PLATFORM_MB
.type = GPIO_PL,
#else
.type = GPIO_PS,
#endif
.device_id = GPIO_DEVICE_ID
};
#endif
#ifdef GENERIC_PLATFORM
extern const struct gpio_platform_ops generic_gpio_platform_ops;
extern const struct spi_platform_ops generic_spi_platform_ops;
#endif
struct axi_adc_init rx_adc_init = {
"cf-ad9361-lpc",
RX_CORE_BASEADDR,
4
};
struct axi_dac_init tx_dac_init = {
"cf-ad9361-dds-core-lpc",
TX_CORE_BASEADDR,
4,
NULL
};
struct axi_dmac_init rx_dmac_init = {
"rx_dmac",
CF_AD9361_RX_DMA_BASEADDR,
DMA_DEV_TO_MEM,
0
};
struct axi_dmac* rx_dmac;
struct axi_dmac_init tx_dmac_init = {
"tx_dmac",
CF_AD9361_TX_DMA_BASEADDR,
DMA_MEM_TO_DEV,
0
};
struct axi_dmac* tx_dmac;
AD9361_InitParam default_init_param = {
/* Device selection */
ID_AD9361, // dev_sel
/* Identification number */
0, //id_no
/* Reference Clock */
40000000UL, //reference_clk_rate
/* Base Configuration */
1, //two_rx_two_tx_mode_enable *** adi,2rx-2tx-mode-enable
1, //one_rx_one_tx_mode_use_rx_num *** adi,1rx-1tx-mode-use-rx-num
1, //one_rx_one_tx_mode_use_tx_num *** adi,1rx-1tx-mode-use-tx-num
1, //frequency_division_duplex_mode_enable *** adi,frequency-division-duplex-mode-enable
0, //frequency_division_duplex_independent_mode_enable *** adi,frequency-division-duplex-independent-mode-enable
0, //tdd_use_dual_synth_mode_enable *** adi,tdd-use-dual-synth-mode-enable
0, //tdd_skip_vco_cal_enable *** adi,tdd-skip-vco-cal-enable
0, //tx_fastlock_delay_ns *** adi,tx-fastlock-delay-ns
0, //rx_fastlock_delay_ns *** adi,rx-fastlock-delay-ns
0, //rx_fastlock_pincontrol_enable *** adi,rx-fastlock-pincontrol-enable
0, //tx_fastlock_pincontrol_enable *** adi,tx-fastlock-pincontrol-enable
0, //external_rx_lo_enable *** adi,external-rx-lo-enable
0, //external_tx_lo_enable *** adi,external-tx-lo-enable
5, //dc_offset_tracking_update_event_mask *** adi,dc-offset-tracking-update-event-mask
6, //dc_offset_attenuation_high_range *** adi,dc-offset-attenuation-high-range
5, //dc_offset_attenuation_low_range *** adi,dc-offset-attenuation-low-range
0x28, //dc_offset_count_high_range *** adi,dc-offset-count-high-range
0x32, //dc_offset_count_low_range *** adi,dc-offset-count-low-range
0, //split_gain_table_mode_enable *** adi,split-gain-table-mode-enable
MAX_SYNTH_FREF, //trx_synthesizer_target_fref_overwrite_hz *** adi,trx-synthesizer-target-fref-overwrite-hz
0, // qec_tracking_slow_mode_enable *** adi,qec-tracking-slow-mode-enable
/* ENSM Control */
0, //ensm_enable_pin_pulse_mode_enable *** adi,ensm-enable-pin-pulse-mode-enable
0, //ensm_enable_txnrx_control_enable *** adi,ensm-enable-txnrx-control-enable
/* LO Control */
2400000000UL, //rx_synthesizer_frequency_hz *** adi,rx-synthesizer-frequency-hz
2400000000UL, //tx_synthesizer_frequency_hz *** adi,tx-synthesizer-frequency-hz
1, //tx_lo_powerdown_managed_enable *** adi,tx-lo-powerdown-managed-enable
/* Rate & BW Control */
{983040000, 245760000, 122880000, 61440000, 30720000, 30720000},// rx_path_clock_frequencies[6] *** adi,rx-path-clock-frequencies
{983040000, 122880000, 122880000, 61440000, 30720000, 30720000},// tx_path_clock_frequencies[6] *** adi,tx-path-clock-frequencies
18000000,//rf_rx_bandwidth_hz *** adi,rf-rx-bandwidth-hz
18000000,//rf_tx_bandwidth_hz *** adi,rf-tx-bandwidth-hz
/* RF Port Control */
0, //rx_rf_port_input_select *** adi,rx-rf-port-input-select
0, //tx_rf_port_input_select *** adi,tx-rf-port-input-select
/* TX Attenuation Control */
10000, //tx_attenuation_mdB *** adi,tx-attenuation-mdB
0, //update_tx_gain_in_alert_enable *** adi,update-tx-gain-in-alert-enable
/* Reference Clock Control */
0, //xo_disable_use_ext_refclk_enable *** adi,xo-disable-use-ext-refclk-enable
{8, 5920}, //dcxo_coarse_and_fine_tune[2] *** adi,dcxo-coarse-and-fine-tune
CLKOUT_DISABLE, //clk_output_mode_select *** adi,clk-output-mode-select
/* Gain Control */
2, //gc_rx1_mode *** adi,gc-rx1-mode
2, //gc_rx2_mode *** adi,gc-rx2-mode
58, //gc_adc_large_overload_thresh *** adi,gc-adc-large-overload-thresh
4, //gc_adc_ovr_sample_size *** adi,gc-adc-ovr-sample-size
47, //gc_adc_small_overload_thresh *** adi,gc-adc-small-overload-thresh
8192, //gc_dec_pow_measurement_duration *** adi,gc-dec-pow-measurement-duration
0, //gc_dig_gain_enable *** adi,gc-dig-gain-enable
800, //gc_lmt_overload_high_thresh *** adi,gc-lmt-overload-high-thresh
704, //gc_lmt_overload_low_thresh *** adi,gc-lmt-overload-low-thresh
24, //gc_low_power_thresh *** adi,gc-low-power-thresh
15, //gc_max_dig_gain *** adi,gc-max-dig-gain
0, //gc_use_rx_fir_out_for_dec_pwr_meas_enable *** adi,gc-use-rx-fir-out-for-dec-pwr-meas-enable
/* Gain MGC Control */
2, //mgc_dec_gain_step *** adi,mgc-dec-gain-step
2, //mgc_inc_gain_step *** adi,mgc-inc-gain-step
0, //mgc_rx1_ctrl_inp_enable *** adi,mgc-rx1-ctrl-inp-enable
0, //mgc_rx2_ctrl_inp_enable *** adi,mgc-rx2-ctrl-inp-enable
0, //mgc_split_table_ctrl_inp_gain_mode *** adi,mgc-split-table-ctrl-inp-gain-mode
/* Gain AGC Control */
10, //agc_adc_large_overload_exceed_counter *** adi,agc-adc-large-overload-exceed-counter
2, //agc_adc_large_overload_inc_steps *** adi,agc-adc-large-overload-inc-steps
0, //agc_adc_lmt_small_overload_prevent_gain_inc_enable *** adi,agc-adc-lmt-small-overload-prevent-gain-inc-enable
10, //agc_adc_small_overload_exceed_counter *** adi,agc-adc-small-overload-exceed-counter
4, //agc_dig_gain_step_size *** adi,agc-dig-gain-step-size
3, //agc_dig_saturation_exceed_counter *** adi,agc-dig-saturation-exceed-counter
1000, // agc_gain_update_interval_us *** adi,agc-gain-update-interval-us
0, //agc_immed_gain_change_if_large_adc_overload_enable *** adi,agc-immed-gain-change-if-large-adc-overload-enable
0, //agc_immed_gain_change_if_large_lmt_overload_enable *** adi,agc-immed-gain-change-if-large-lmt-overload-enable
10, //agc_inner_thresh_high *** adi,agc-inner-thresh-high
1, //agc_inner_thresh_high_dec_steps *** adi,agc-inner-thresh-high-dec-steps
12, //agc_inner_thresh_low *** adi,agc-inner-thresh-low
1, //agc_inner_thresh_low_inc_steps *** adi,agc-inner-thresh-low-inc-steps
10, //agc_lmt_overload_large_exceed_counter *** adi,agc-lmt-overload-large-exceed-counter
2, //agc_lmt_overload_large_inc_steps *** adi,agc-lmt-overload-large-inc-steps
10, //agc_lmt_overload_small_exceed_counter *** adi,agc-lmt-overload-small-exceed-counter
5, //agc_outer_thresh_high *** adi,agc-outer-thresh-high
2, //agc_outer_thresh_high_dec_steps *** adi,agc-outer-thresh-high-dec-steps
18, //agc_outer_thresh_low *** adi,agc-outer-thresh-low
2, //agc_outer_thresh_low_inc_steps *** adi,agc-outer-thresh-low-inc-steps
1, //agc_attack_delay_extra_margin_us; *** adi,agc-attack-delay-extra-margin-us
0, //agc_sync_for_gain_counter_enable *** adi,agc-sync-for-gain-counter-enable
/* Fast AGC */
64, //fagc_dec_pow_measuremnt_duration *** adi,fagc-dec-pow-measurement-duration
260, //fagc_state_wait_time_ns *** adi,fagc-state-wait-time-ns
/* Fast AGC - Low Power */
0, //fagc_allow_agc_gain_increase *** adi,fagc-allow-agc-gain-increase-enable
5, //fagc_lp_thresh_increment_time *** adi,fagc-lp-thresh-increment-time
1, //fagc_lp_thresh_increment_steps *** adi,fagc-lp-thresh-increment-steps
/* Fast AGC - Lock Level (Lock Level is set via slow AGC inner high threshold) */
1, //fagc_lock_level_lmt_gain_increase_en *** adi,fagc-lock-level-lmt-gain-increase-enable
5, //fagc_lock_level_gain_increase_upper_limit *** adi,fagc-lock-level-gain-increase-upper-limit
/* Fast AGC - Peak Detectors and Final Settling */
1, //fagc_lpf_final_settling_steps *** adi,fagc-lpf-final-settling-steps
1, //fagc_lmt_final_settling_steps *** adi,fagc-lmt-final-settling-steps
3, //fagc_final_overrange_count *** adi,fagc-final-overrange-count
/* Fast AGC - Final Power Test */
0, //fagc_gain_increase_after_gain_lock_en *** adi,fagc-gain-increase-after-gain-lock-enable
/* Fast AGC - Unlocking the Gain */
0, //fagc_gain_index_type_after_exit_rx_mode *** adi,fagc-gain-index-type-after-exit-rx-mode
1, //fagc_use_last_lock_level_for_set_gain_en *** adi,fagc-use-last-lock-level-for-set-gain-enable
1, //fagc_rst_gla_stronger_sig_thresh_exceeded_en *** adi,fagc-rst-gla-stronger-sig-thresh-exceeded-enable
5, //fagc_optimized_gain_offset *** adi,fagc-optimized-gain-offset
10, //fagc_rst_gla_stronger_sig_thresh_above_ll *** adi,fagc-rst-gla-stronger-sig-thresh-above-ll
1, //fagc_rst_gla_engergy_lost_sig_thresh_exceeded_en *** adi,fagc-rst-gla-engergy-lost-sig-thresh-exceeded-enable
1, //fagc_rst_gla_engergy_lost_goto_optim_gain_en *** adi,fagc-rst-gla-engergy-lost-goto-optim-gain-enable
10, //fagc_rst_gla_engergy_lost_sig_thresh_below_ll *** adi,fagc-rst-gla-engergy-lost-sig-thresh-below-ll
8, //fagc_energy_lost_stronger_sig_gain_lock_exit_cnt *** adi,fagc-energy-lost-stronger-sig-gain-lock-exit-cnt
1, //fagc_rst_gla_large_adc_overload_en *** adi,fagc-rst-gla-large-adc-overload-enable
1, //fagc_rst_gla_large_lmt_overload_en *** adi,fagc-rst-gla-large-lmt-overload-enable
0, //fagc_rst_gla_en_agc_pulled_high_en *** adi,fagc-rst-gla-en-agc-pulled-high-enable
0, //fagc_rst_gla_if_en_agc_pulled_high_mode *** adi,fagc-rst-gla-if-en-agc-pulled-high-mode
64, //fagc_power_measurement_duration_in_state5 *** adi,fagc-power-measurement-duration-in-state5
2, //fagc_large_overload_inc_steps *** adi,fagc-adc-large-overload-inc-steps
/* RSSI Control */
1, //rssi_delay *** adi,rssi-delay
1000, //rssi_duration *** adi,rssi-duration
3, //rssi_restart_mode *** adi,rssi-restart-mode
0, //rssi_unit_is_rx_samples_enable *** adi,rssi-unit-is-rx-samples-enable
1, //rssi_wait *** adi,rssi-wait
/* Aux ADC Control */
256, //aux_adc_decimation *** adi,aux-adc-decimation
40000000UL, //aux_adc_rate *** adi,aux-adc-rate
/* AuxDAC Control */
1, //aux_dac_manual_mode_enable *** adi,aux-dac-manual-mode-enable
0, //aux_dac1_default_value_mV *** adi,aux-dac1-default-value-mV
0, //aux_dac1_active_in_rx_enable *** adi,aux-dac1-active-in-rx-enable
0, //aux_dac1_active_in_tx_enable *** adi,aux-dac1-active-in-tx-enable
0, //aux_dac1_active_in_alert_enable *** adi,aux-dac1-active-in-alert-enable
0, //aux_dac1_rx_delay_us *** adi,aux-dac1-rx-delay-us
0, //aux_dac1_tx_delay_us *** adi,aux-dac1-tx-delay-us
0, //aux_dac2_default_value_mV *** adi,aux-dac2-default-value-mV
0, //aux_dac2_active_in_rx_enable *** adi,aux-dac2-active-in-rx-enable
0, //aux_dac2_active_in_tx_enable *** adi,aux-dac2-active-in-tx-enable
0, //aux_dac2_active_in_alert_enable *** adi,aux-dac2-active-in-alert-enable
0, //aux_dac2_rx_delay_us *** adi,aux-dac2-rx-delay-us
0, //aux_dac2_tx_delay_us *** adi,aux-dac2-tx-delay-us
/* Temperature Sensor Control */
256, //temp_sense_decimation *** adi,temp-sense-decimation
1000, //temp_sense_measurement_interval_ms *** adi,temp-sense-measurement-interval-ms
0xCE, //temp_sense_offset_signed *** adi,temp-sense-offset-signed
1, //temp_sense_periodic_measurement_enable *** adi,temp-sense-periodic-measurement-enable
/* Control Out Setup */
0xFF, //ctrl_outs_enable_mask *** adi,ctrl-outs-enable-mask
0, //ctrl_outs_index *** adi,ctrl-outs-index
/* External LNA Control */
0, //elna_settling_delay_ns *** adi,elna-settling-delay-ns
0, //elna_gain_mdB *** adi,elna-gain-mdB
0, //elna_bypass_loss_mdB *** adi,elna-bypass-loss-mdB
0, //elna_rx1_gpo0_control_enable *** adi,elna-rx1-gpo0-control-enable
0, //elna_rx2_gpo1_control_enable *** adi,elna-rx2-gpo1-control-enable
0, //elna_gaintable_all_index_enable *** adi,elna-gaintable-all-index-enable
/* Digital Interface Control */
0, //digital_interface_tune_skip_mode *** adi,digital-interface-tune-skip-mode
0, //digital_interface_tune_fir_disable *** adi,digital-interface-tune-fir-disable
1, //pp_tx_swap_enable *** adi,pp-tx-swap-enable
1, //pp_rx_swap_enable *** adi,pp-rx-swap-enable
0, //tx_channel_swap_enable *** adi,tx-channel-swap-enable
0, //rx_channel_swap_enable *** adi,rx-channel-swap-enable
1, //rx_frame_pulse_mode_enable *** adi,rx-frame-pulse-mode-enable
0, //two_t_two_r_timing_enable *** adi,2t2r-timing-enable
0, //invert_data_bus_enable *** adi,invert-data-bus-enable
0, //invert_data_clk_enable *** adi,invert-data-clk-enable
0, //fdd_alt_word_order_enable *** adi,fdd-alt-word-order-enable
0, //invert_rx_frame_enable *** adi,invert-rx-frame-enable
0, //fdd_rx_rate_2tx_enable *** adi,fdd-rx-rate-2tx-enable
0, //swap_ports_enable *** adi,swap-ports-enable
0, //single_data_rate_enable *** adi,single-data-rate-enable
1, //lvds_mode_enable *** adi,lvds-mode-enable
0, //half_duplex_mode_enable *** adi,half-duplex-mode-enable
0, //single_port_mode_enable *** adi,single-port-mode-enable
0, //full_port_enable *** adi,full-port-enable
0, //full_duplex_swap_bits_enable *** adi,full-duplex-swap-bits-enable
0, //delay_rx_data *** adi,delay-rx-data
0, //rx_data_clock_delay *** adi,rx-data-clock-delay
4, //rx_data_delay *** adi,rx-data-delay
7, //tx_fb_clock_delay *** adi,tx-fb-clock-delay
0, //tx_data_delay *** adi,tx-data-delay
#ifdef ALTERA_PLATFORM
300, //lvds_bias_mV *** adi,lvds-bias-mV
#else
150, //lvds_bias_mV *** adi,lvds-bias-mV
#endif
1, //lvds_rx_onchip_termination_enable *** adi,lvds-rx-onchip-termination-enable
0, //rx1rx2_phase_inversion_en *** adi,rx1-rx2-phase-inversion-enable
0xFF, //lvds_invert1_control *** adi,lvds-invert1-control
0x0F, //lvds_invert2_control *** adi,lvds-invert2-control
/* GPO Control */
0, //gpo_manual_mode_enable *** adi,gpo-manual-mode-enable
0, //gpo_manual_mode_enable_mask *** adi,gpo-manual-mode-enable-mask
0, //gpo0_inactive_state_high_enable *** adi,gpo0-inactive-state-high-enable
0, //gpo1_inactive_state_high_enable *** adi,gpo1-inactive-state-high-enable
0, //gpo2_inactive_state_high_enable *** adi,gpo2-inactive-state-high-enable
0, //gpo3_inactive_state_high_enable *** adi,gpo3-inactive-state-high-enable
0, //gpo0_slave_rx_enable *** adi,gpo0-slave-rx-enable
0, //gpo0_slave_tx_enable *** adi,gpo0-slave-tx-enable
0, //gpo1_slave_rx_enable *** adi,gpo1-slave-rx-enable
0, //gpo1_slave_tx_enable *** adi,gpo1-slave-tx-enable
0, //gpo2_slave_rx_enable *** adi,gpo2-slave-rx-enable
0, //gpo2_slave_tx_enable *** adi,gpo2-slave-tx-enable
0, //gpo3_slave_rx_enable *** adi,gpo3-slave-rx-enable
0, //gpo3_slave_tx_enable *** adi,gpo3-slave-tx-enable
0, //gpo0_rx_delay_us *** adi,gpo0-rx-delay-us
0, //gpo0_tx_delay_us *** adi,gpo0-tx-delay-us
0, //gpo1_rx_delay_us *** adi,gpo1-rx-delay-us
0, //gpo1_tx_delay_us *** adi,gpo1-tx-delay-us
0, //gpo2_rx_delay_us *** adi,gpo2-rx-delay-us
0, //gpo2_tx_delay_us *** adi,gpo2-tx-delay-us
0, //gpo3_rx_delay_us *** adi,gpo3-rx-delay-us
0, //gpo3_tx_delay_us *** adi,gpo3-tx-delay-us
/* Tx Monitor Control */
37000, //low_high_gain_threshold_mdB *** adi,txmon-low-high-thresh
0, //low_gain_dB *** adi,txmon-low-gain
24, //high_gain_dB *** adi,txmon-high-gain
0, //tx_mon_track_en *** adi,txmon-dc-tracking-enable
0, //one_shot_mode_en *** adi,txmon-one-shot-mode-enable
511, //tx_mon_delay *** adi,txmon-delay
8192, //tx_mon_duration *** adi,txmon-duration
2, //tx1_mon_front_end_gain *** adi,txmon-1-front-end-gain
2, //tx2_mon_front_end_gain *** adi,txmon-2-front-end-gain
48, //tx1_mon_lo_cm *** adi,txmon-1-lo-cm
48, //tx2_mon_lo_cm *** adi,txmon-2-lo-cm
/* GPIO definitions */
{
.number = -1,
#ifdef XILINX_PLATFORM
.platform_ops = &xil_gpio_platform_ops,
.extra = &xil_gpio_param
#endif
#ifdef LINUX_PLATFORM
.platform_ops = &linux_gpio_platform_ops
#endif
#ifdef GENERIC_PLATFORM
.platform_ops = &generic_gpio_platform_ops
#endif
}, //gpio_resetb *** reset-gpios
/* MCS Sync */
{
.number = -1,
#ifdef XILINX_PLATFORM
.platform_ops = &xil_gpio_platform_ops,
.extra = &xil_gpio_param
#endif
#ifdef LINUX_PLATFORM
.platform_ops = &linux_gpio_platform_ops
#endif
#ifdef GENERIC_PLATFORM
.platform_ops = &generic_gpio_platform_ops
#endif
}, //gpio_sync *** sync-gpios
{
.number = -1,
#ifdef XILINX_PLATFORM
.platform_ops = &xil_gpio_platform_ops,
.extra = &xil_gpio_param
#endif
#ifdef LINUX_PLATFORM
.platform_ops = &linux_gpio_platform_ops
#endif
#ifdef GENERIC_PLATFORM
.platform_ops = &generic_gpio_platform_ops
#endif
}, //gpio_cal_sw1 *** cal-sw1-gpios
{
.number = -1,
#ifdef XILINX_PLATFORM
.platform_ops = &xil_gpio_platform_ops,
.extra = &xil_gpio_param
#endif
#ifdef LINUX_PLATFORM
.platform_ops = &linux_gpio_platform_ops
#endif
#ifdef GENERIC_PLATFORM
.platform_ops = &generic_gpio_platform_ops
#endif
}, //gpio_cal_sw2 *** cal-sw2-gpios
{
.device_id = SPI_DEVICE_ID,
.mode = SPI_MODE_1,
.chip_select = SPI_CS,
#ifdef XILINX_PLATFORM
.extra = &xil_spi_param,
.platform_ops = &xil_platform_ops
#endif
#ifdef LINUX_PLATFORM
.platform_ops = &linux_spi_platform_ops
#endif
#ifdef GENERIC_PLATFORM
.platform_ops = &generic_spi_platform_ops
#endif
},
/* External LO clocks */
NULL, //(*ad9361_rfpll_ext_recalc_rate)()
NULL, //(*ad9361_rfpll_ext_round_rate)()
NULL, //(*ad9361_rfpll_ext_set_rate)()
#ifndef AXI_ADC_NOT_PRESENT
& rx_adc_init, // *rx_adc_init
&tx_dac_init, // *tx_dac_init
#endif
};
AD9361_RXFIRConfig rx_fir_config = { // BPF PASSBAND 3/20 fs to 1/4 fs
3, // rx
0, // rx_gain
1, // rx_dec
{
-4, -6, -37, 35, 186, 86, -284, -315,
107, 219, -4, 271, 558, -307, -1182, -356,
658, 157, 207, 1648, 790, -2525, -2553, 748,
865, -476, 3737, 6560, -3583, -14731, -5278, 14819,
14819, -5278, -14731, -3583, 6560, 3737, -476, 865,
748, -2553, -2525, 790, 1648, 207, 157, 658,
-356, -1182, -307, 558, 271, -4, 219, 107,
-315, -284, 86, 186, 35, -37, -6, -4,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0
}, // rx_coef[128]
64, // rx_coef_size
{0, 0, 0, 0, 0, 0}, //rx_path_clks[6]
0 // rx_bandwidth
};
AD9361_TXFIRConfig tx_fir_config = { // BPF PASSBAND 3/20 fs to 1/4 fs
3, // tx
-6, // tx_gain
1, // tx_int
{
-4, -6, -37, 35, 186, 86, -284, -315,
107, 219, -4, 271, 558, -307, -1182, -356,
658, 157, 207, 1648, 790, -2525, -2553, 748,
865, -476, 3737, 6560, -3583, -14731, -5278, 14819,
14819, -5278, -14731, -3583, 6560, 3737, -476, 865,
748, -2553, -2525, 790, 1648, 207, 157, 658,
-356, -1182, -307, 558, 271, -4, 219, 107,
-315, -284, 86, 186, 35, -37, -6, -4,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0
}, // tx_coef[128]
64, // tx_coef_size
{0, 0, 0, 0, 0, 0}, // tx_path_clks[6]
0 // tx_bandwidth
};
struct ad9361_rf_phy* ad9361_phy;
#ifdef FMCOMMS5
struct ad9361_rf_phy* ad9361_phy_b;
#endif
/***************************************************************************//**
* @brief main
*******************************************************************************/
int main(void)
{
int32_t status;
#ifdef XILINX_PLATFORM
Xil_ICacheEnable();
Xil_DCacheEnable();
default_init_param.spi_param.extra = &xil_spi_param;
default_init_param.spi_param.platform_ops = &xil_platform_ops;
#endif
#ifdef ALTERA_PLATFORM
default_init_param.spi_param.platform_ops = &altera_platform_ops;
if (altera_bridge_init()) {
printf("Altera Bridge Init Error!\n");
return -1;
}
#endif
// NOTE: The user has to choose the GPIO numbers according to desired
// carrier board.
default_init_param.gpio_resetb.number = GPIO_RESET_PIN;
#ifdef FMCOMMS5
default_init_param.gpio_sync.number = GPIO_SYNC_PIN;
default_init_param.gpio_cal_sw1.number = GPIO_CAL_SW1_PIN;
default_init_param.gpio_cal_sw2.number = GPIO_CAL_SW2_PIN;
default_init_param.rx1rx2_phase_inversion_en = 1;
#else
default_init_param.gpio_sync.number = -1;
default_init_param.gpio_cal_sw1.number = -1;
default_init_param.gpio_cal_sw2.number = -1;
#endif
if (AD9364_DEVICE)
default_init_param.dev_sel = ID_AD9364;
if (AD9363A_DEVICE)
default_init_param.dev_sel = ID_AD9363A;
#if defined FMCOMMS5 || defined ADI_RF_SOM || defined ADI_RF_SOM_CMOS
default_init_param.xo_disable_use_ext_refclk_enable = 1;
#endif
#ifdef ADI_RF_SOM_CMOS
default_init_param.swap_ports_enable = 1;
default_init_param.lvds_mode_enable = 0;
default_init_param.lvds_rx_onchip_termination_enable = 0;
default_init_param.full_port_enable = 1;
default_init_param.digital_interface_tune_fir_disable = 1;
#endif
ad9361_init(&ad9361_phy, &default_init_param);
ad9361_set_tx_fir_config(ad9361_phy, tx_fir_config);
ad9361_set_rx_fir_config(ad9361_phy, rx_fir_config);
#ifdef FMCOMMS5
#ifdef LINUX_PLATFORM
gpio_init(default_init_param.gpio_sync);
#endif
default_init_param.id_no = SPI_CS_2;
default_init_param.gpio_resetb.number = GPIO_RESET_PIN_2;
#ifdef LINUX_PLATFORM
gpio_init(default_init_param.gpio_resetb);
#endif
default_init_param.gpio_sync.number = -1;
default_init_param.gpio_cal_sw1.number = -1;
default_init_param.gpio_cal_sw2.number = -1;
default_init_param.rx_synthesizer_frequency_hz = 2300000000UL;
default_init_param.tx_synthesizer_frequency_hz = 2300000000UL;
rx_adc_init.base = AD9361_RX_1_BASEADDR;
tx_dac_init.base = AD9361_TX_1_BASEADDR;
ad9361_init(&ad9361_phy_b, &default_init_param);
ad9361_set_tx_fir_config(ad9361_phy_b, tx_fir_config);
ad9361_set_rx_fir_config(ad9361_phy_b, rx_fir_config);
#endif
status = axi_dmac_init(&tx_dmac, &tx_dmac_init);
if (status < 0) {
printf("axi_dmac_init tx init error: %"PRIi32"\n", status);
return status;
}
status = axi_dmac_init(&rx_dmac, &rx_dmac_init);
if (status < 0) {
printf("axi_dmac_init rx init error: %"PRIi32"\n", status);
return status;
}
#ifndef AXI_ADC_NOT_PRESENT
#if defined XILINX_PLATFORM || defined LINUX_PLATFORM || defined ALTERA_PLATFORM
#ifdef DAC_DMA_EXAMPLE
#ifdef FMCOMMS5
axi_dac_init(&ad9361_phy->tx_dac, &tx_dac_init);
axi_dac_set_datasel(ad9361_phy_b->tx_dac, -1, AXI_DAC_DATA_SEL_DMA);
#endif
axi_dac_init(&ad9361_phy->tx_dac, &tx_dac_init);
axi_dac_set_datasel(ad9361_phy->tx_dac, -1, AXI_DAC_DATA_SEL_DMA);
axi_dac_set_sine_lut(ad9361_phy->tx_dac, DAC_DDR_BASEADDR);
#else
#ifdef FMCOMMS5
axi_dac_init(&ad9361_phy_b->tx_dac, &tx_dac_init);
axi_dac_set_datasel(ad9361_phy_b->tx_dac, -1, AXI_DAC_DATA_SEL_DDS);
#endif
axi_dac_init(&ad9361_phy->tx_dac, &tx_dac_init);
axi_dac_set_datasel(ad9361_phy->tx_dac, -1, AXI_DAC_DATA_SEL_DDS);
#endif
#endif
#endif
#ifdef FMCOMMS5
ad9361_do_mcs(ad9361_phy, ad9361_phy_b);
#endif
#ifndef AXI_ADC_NOT_PRESENT
#if (defined XILINX_PLATFORM || defined ALTERA_PLATFORM) && \
(defined ADC_DMA_EXAMPLE)
uint32_t samples = 16384;
#if (defined ADC_DMA_IRQ_EXAMPLE)
/**
* Xilinx platform dependent initialization for IRQ.
*/
struct xil_irq_init_param xil_irq_init_par = {
.type = IRQ_PS,
};
/**
* IRQ initial configuration.
*/
struct irq_init_param irq_init_param = {
.irq_ctrl_id = INTC_DEVICE_ID,
.extra = &xil_irq_init_par,
};
/**
* IRQ instance.
*/
struct irq_ctrl_desc* irq_desc;
status = irq_ctrl_init(&irq_desc, &irq_init_param);
if (status < 0)
return status;
status = irq_global_enable(irq_desc);
if (status < 0)
return status;
struct callback_desc rx_dmac_callback = {
.ctx = rx_dmac,
.callback = axi_dmac_default_isr,
.config = NULL
};
status = irq_register_callback(irq_desc,
XPAR_FABRIC_AXI_AD9361_ADC_DMA_IRQ_INTR, &rx_dmac_callback);
if (status < 0)
return status;
status = irq_trigger_level_set(irq_desc,
XPAR_FABRIC_AXI_AD9361_ADC_DMA_IRQ_INTR, IRQ_LEVEL_HIGH);
if (status < 0)
return status;
status = irq_enable(irq_desc, XPAR_FABRIC_AXI_AD9361_ADC_DMA_IRQ_INTR);
if (status < 0)
return status;
samples = 2097150;
#endif
// NOTE: To prevent unwanted data loss, it's recommended to invalidate
// cache after each adc_capture() call, keeping in mind that the
// size of the capture and the start address must be alinged to the size
// of the cache line.
mdelay(1000);
#ifdef DAC_DMA_EXAMPLE
struct callback_desc tx_dmac_callback = {
.ctx = tx_dmac,
.callback = axi_dmac_default_isr,
.config = NULL
};
status = irq_register_callback(irq_desc,
XPAR_FABRIC_AXI_AD9361_DAC_DMA_IRQ_INTR, &tx_dmac_callback);
if (status < 0)
return status;
status = irq_enable(irq_desc, XPAR_FABRIC_AXI_AD9361_DAC_DMA_IRQ_INTR);
if (status < 0)
return status;
axi_dmac_transfer_nonblocking(tx_dmac, DAC_DDR_BASEADDR, samples * 16);
#endif
axi_dmac_transfer(rx_dmac, ADC_DDR_BASEADDR, samples * 16);
#ifdef XILINX_PLATFORM
#ifdef FMCOMMS5
Xil_DCacheInvalidateRange(ADC_DDR_BASEADDR, samples * 16);
#else
Xil_DCacheInvalidateRange(ADC_DDR_BASEADDR,
ad9361_phy->pdata->rx2tx2 ? samples * 8 : samples * 4);
#endif
#endif
#endif
#endif
#ifdef IIO_SUPPORT
/**
* iio application configurations.
*/
struct iio_init_param iio_init_par;
/**
* iio axi adc configurations.
*/
struct iio_axi_adc_init_param iio_axi_adc_init_par;
/**
* iio axi dac configurations.
*/
struct iio_axi_dac_init_param iio_axi_dac_init_par;
/**
* iio ad9361 configurations.
*/
struct iio_ad9361_init_param iio_ad9361_init_param;
/**
* iio application instance descriptor.
*/
struct iio_desc* iio_app_desc;
/**
* iio instance descriptor.
*/
struct iio_axi_adc_desc* iio_axi_adc_desc;
/**
* iio instance descriptor.
*/
struct iio_axi_dac_desc* iio_axi_dac_desc;
/**
* iio ad9361 instance descriptor.
*/
struct iio_ad9361_desc* iio_ad9361_desc;
/**
* Xilinx platform dependent initialization for IRQ.
*/
struct xil_irq_init_param xil_irq_init_par = {
.type = IRQ_PS,
};
/**
* IRQ initial configuration.
*/
struct irq_init_param irq_init_param = {
.irq_ctrl_id = INTC_DEVICE_ID,
.extra = &xil_irq_init_par,
};
/**
* iio devices corresponding to every device.
*/
struct iio_device* adc_dev_desc, * dac_dev_desc, * ad9361_dev_desc;
/**
* IRQ instance.
*/
struct irq_ctrl_desc* irq_desc;
/**
* Xilinx platform dependent initialization for UART.
*/
struct xil_uart_init_param xil_uart_init_par;
/**
* Initialization for UART.
*/
struct uart_init_param uart_init_par;
struct uart_desc* uart_desc;
status = irq_ctrl_init(&irq_desc, &irq_init_param);
if (status < 0)
return status;
xil_uart_init_par = (struct xil_uart_init_param){
.type = UART_PS,
.irq_id = UART_IRQ_ID,
.irq_desc = irq_desc,
};
uart_init_par = (struct uart_init_param){
.baud_rate = 921600,
.device_id = UART_DEVICE_ID,
.extra = &xil_uart_init_par,
};
status = irq_global_enable(irq_desc);
if (status < 0)
return status;
status = axi_dmac_init(&tx_dmac, &tx_dmac_init);
if (status < 0)
return status;
status = uart_init(&uart_desc, &uart_init_par);
if (status < 0)
return status;
iio_init_par.phy_type = USE_UART;
iio_init_par.uart_desc = uart_desc;
status = iio_init(&iio_app_desc, &iio_init_par);
if (status < 0)
return status;
iio_axi_adc_init_par = (struct iio_axi_adc_init_param){
.rx_adc = ad9361_phy->rx_adc,
.rx_dmac = rx_dmac,
#ifndef PLATFORM_MB
.dcache_invalidate_range = (void (*)(uint32_t,
uint32_t))Xil_DCacheInvalidateRange
#endif
};
status = iio_axi_adc_init(&iio_axi_adc_desc, &iio_axi_adc_init_par);
if (status < 0)
return status;
iio_axi_adc_get_dev_descriptor(iio_axi_adc_desc, &adc_dev_desc);
struct iio_data_buffer read_buff = {
.buff = (void*)ADC_DDR_BASEADDR,
.size = 0xFFFFFFFF,
};
status = iio_register(iio_app_desc, adc_dev_desc, "cf-ad9361-lpc",
iio_axi_adc_desc, &read_buff, NULL);
if (status < 0)
return status;
iio_axi_dac_init_par = (struct iio_axi_dac_init_param){
.tx_dac = ad9361_phy->tx_dac,
.tx_dmac = tx_dmac,
#ifndef PLATFORM_MB
.dcache_flush_range = (void (*)(uint32_t, uint32_t))Xil_DCacheFlushRange,
#endif
};
status = iio_axi_dac_init(&iio_axi_dac_desc, &iio_axi_dac_init_par);
if (status < 0)
return status;
iio_axi_dac_get_dev_descriptor(iio_axi_dac_desc, &dac_dev_desc);
struct iio_data_buffer write_buff = {
.buff = (void*)DAC_DDR_BASEADDR,
.size = 0xFFFFFFFF,
};
status = iio_register(iio_app_desc, dac_dev_desc, "cf-ad9361-dds-core-lpc",
iio_axi_dac_desc, NULL, &write_buff);
if (status < 0)
return status;
iio_ad9361_init_param = (struct iio_ad9361_init_param){
.ad9361_phy = ad9361_phy,
};
status = iio_ad9361_init(&iio_ad9361_desc, &iio_ad9361_init_param);
if (status < 0)
return status;
iio_ad9361_get_dev_descriptor(iio_ad9361_desc, &ad9361_dev_desc);
status = iio_register(iio_app_desc, ad9361_dev_desc, "ad9361-phy", ad9361_phy,
NULL, NULL);
if (status < 0)
return status;
do {
status = iio_step(iio_app_desc);
} while (true);
#endif // IIO_SUPPORT
printf("Done.\n");
#ifdef TDD_SWITCH_STATE_EXAMPLE
uint32_t ensm_mode;
struct gpio_desc* gpio_enable_pin;
struct gpio_desc* gpio_txnrx_pin;
if (!ad9361_phy->pdata->fdd) {
if (ad9361_phy->pdata->ensm_pin_ctrl) {
gpio_init.number = GPIO_ENABLE_PIN;
status = gpio_get(&gpio_enable_pin, gpio_init);
if (status != SUCCESS) {
printf("gpio_get() error: %"PRIi32"\n", status);
return status;
}
gpio_direction_output(gpio_enable_pin, 1);
gpio_init.number = GPIO_TXNRX_PIN;
status = gpio_get(&gpio_txnrx_pin, gpio_init);
if (status != SUCCESS) {
printf("gpio_get() error: %"PRIi32"\n", status);
return status;
}
gpio_direction_output(gpio_txnrx_pin, 0);
udelay(10);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("TXNRX control - Alert: %s\n",
ensm_mode == ENSM_MODE_ALERT ? "OK" : "Error");
mdelay(1000);
if (ad9361_phy->pdata->ensm_pin_pulse_mode) {
while (1) {
gpio_set_value(gpio_txnrx_pin, 0);
udelay(10);
gpio_set_value(gpio_enable_pin, 1);
udelay(10);
gpio_set_value(gpio_enable_pin, 0);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("TXNRX Pulse control - RX: %s\n",
ensm_mode == ENSM_MODE_RX ? "OK" : "Error");
mdelay(1000);
gpio_set_value(gpio_enable_pin, 1);
udelay(10);
gpio_set_value(gpio_enable_pin, 0);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("TXNRX Pulse control - Alert: %s\n",
ensm_mode == ENSM_MODE_ALERT ? "OK" : "Error");
mdelay(1000);
gpio_set_value(gpio_txnrx_pin, 1);
udelay(10);
gpio_set_value(gpio_enable_pin, 1);
udelay(10);
gpio_set_value(gpio_enable_pin, 0);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("TXNRX Pulse control - TX: %s\n",
ensm_mode == ENSM_MODE_TX ? "OK" : "Error");
mdelay(1000);
gpio_set_value(gpio_enable_pin, 1);
udelay(10);
gpio_set_value(gpio_enable_pin, 0);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("TXNRX Pulse control - Alert: %s\n",
ensm_mode == ENSM_MODE_ALERT ? "OK" : "Error");
mdelay(1000);
}
}
else {
while (1) {
gpio_set_value(gpio_txnrx_pin, 0);
udelay(10);
gpio_set_value(gpio_enable_pin, 1);
udelay(10);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("TXNRX control - RX: %s\n",
ensm_mode == ENSM_MODE_RX ? "OK" : "Error");
mdelay(1000);
gpio_set_value(gpio_enable_pin, 0);
udelay(10);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("TXNRX control - Alert: %s\n",
ensm_mode == ENSM_MODE_ALERT ? "OK" : "Error");
mdelay(1000);
gpio_set_value(gpio_txnrx_pin, 1);
udelay(10);
gpio_set_value(gpio_enable_pin, 1);
udelay(10);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("TXNRX control - TX: %s\n",
ensm_mode == ENSM_MODE_TX ? "OK" : "Error");
mdelay(1000);
gpio_set_value(gpio_enable_pin, 0);
udelay(10);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("TXNRX control - Alert: %s\n",
ensm_mode == ENSM_MODE_ALERT ? "OK" : "Error");
mdelay(1000);
}
}
}
else {
while (1) {
ad9361_set_en_state_machine_mode(ad9361_phy, ENSM_MODE_RX);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("SPI control - RX: %s\n",
ensm_mode == ENSM_MODE_RX ? "OK" : "Error");
mdelay(1000);
ad9361_set_en_state_machine_mode(ad9361_phy, ENSM_MODE_ALERT);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("SPI control - Alert: %s\n",
ensm_mode == ENSM_MODE_ALERT ? "OK" : "Error");
mdelay(1000);
ad9361_set_en_state_machine_mode(ad9361_phy, ENSM_MODE_TX);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("SPI control - TX: %s\n",
ensm_mode == ENSM_MODE_TX ? "OK" : "Error");
mdelay(1000);
ad9361_set_en_state_machine_mode(ad9361_phy, ENSM_MODE_ALERT);
ad9361_get_en_state_machine_mode(ad9361_phy, &ensm_mode);
printf("SPI control - Alert: %s\n",
ensm_mode == ENSM_MODE_ALERT ? "OK" : "Error");
mdelay(1000);
}
}
}
#endif
ad9361_remove(ad9361_phy);
#ifdef FMCOMMS5
ad9361_remove(ad9361_phy_b);
#endif
#ifdef XILINX_PLATFORM
Xil_DCacheDisable();
Xil_ICacheDisable();
#endif
#ifdef ALTERA_PLATFORM
if (altera_bridge_uninit()) {
printf("Altera Bridge Uninit Error!\n");
return -1;
}
#endif
return 0;
}
/***************************************************************************//** * @file app_config.h * @brief Config file of AD9361/API Driver. * @author DBogdan (dragos.bogdan@analog.com) ******************************************************************************** * Copyright 2015(c) Analog Devices, Inc. * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * - Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * - Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * - Neither the name of Analog Devices, Inc. nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * - The use of this software may or may not infringe the patent rights * of one or more patent holders. This license does not release you * from the requirement that you obtain separate licenses from these * patent holders to use this software. * - Use of the software either in source or binary form, must be run * on or directly connected to an Analog Devices Inc. component. * * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *******************************************************************************/ #ifndef CONFIG_H_ #define CONFIG_H_ #define HAVE_SPLIT_GAIN_TABLE 1 /* only set to 0 in case split_gain_table_mode_enable = 0*/ #define HAVE_TDD_SYNTH_TABLE 1 /* only set to 0 in case split_gain_table_mode_enable = 0*/ #define AD9361_DEVICE 0 /* set it 1 if AD9361 device is used, 0 otherwise */ #define AD9364_DEVICE 1 /* set it 1 if AD9364 device is used, 0 otherwise */ #define AD9363A_DEVICE 0 /* set it 1 if AD9363A device is used, 0 otherwise */ #define XILINX_PLATFORM //#define ALTERA_PLATFORM //#define LINUX_PLATFORM //#define FMCOMMS5 #define ADI_RF_SOM //#define ADI_RF_SOM_CMOS //#define ADC_DMA_EXAMPLE //#define ADC_DMA_IRQ_EXAMPLE #define DAC_DMA_EXAMPLE //#define AXI_ADC_NOT_PRESENT //#define TDD_SWITCH_STATE_EXAMPLE //#define IIO_SUPPORT #ifndef IIO_SUPPORT #define HAVE_VERBOSE_MESSAGES /* Recommended during development prints errors and warnings */ //#define HAVE_DEBUG_MESSAGES /* For Debug purposes only */ #endif // USE_LIBIIO /* * In case memory footprint is a concern these options allow * to disable unused functionality which may free up a few kb */ #endif
