spi_init error using AD7134_EVAL board with zedboard running no-os

Hello Vick,

Can you please specify the hdl branch and the no-OS branch that you used to build your application?

Can you try to use our build guide for generating your project: https://wiki.analog.com/resources/no-os/build

Regards,

Antoniu

Hello Vick,

Can you please specify the hdl branch and the no-OS branch that you used to build your application?

Can you try to use our build guide for generating your project: https://wiki.analog.com/resources/no-os/build

Regards,

Antoniu

hdl master and I used the guide you specify for no-os.

I found out yesterday there is a design issue with the AD7134_EVAL board.  The FMC connectors don't mate fully with the zedboard because the VGA connector on the zedboard is too tall.  How are you guys dealing with this issue?  I suspect this is why my spi is failing.

Hi Vick,

We are using something similar to this: www.avnet.com/.../

Why is there no warning on the product page? 

Are you planning to fix this this problem? If so, when will it be released?

https://ez.analog.com/data_converters/precision_adcs/ can provide more details about the EVAL-AD7134FMCZ hardware.

Thanks,
Dragos