There is no console command for AD9361 in the new version ?

Hello,

The new direction for no-OS is to use iio in our projects, so please use iio utilities:

https://wiki.analog.com/resources/tools-software/linux-software/libiio/iio_readdev

and build the project as described here:

https://wiki.analog.com/resources/tools-software/no-os-software/iio

Cristian

Thank you, Cristian.

Now I know why there is no console command..

I want use the console to control the board, which branch of no-OS should I use ?

Hi,

You can still use the the 2019_R1 branch - however, we don't support that branch anymore.

Thanks,
Dragos

Thank you Dragos!

Seems I should start to read the iio documents...

Hi,

There is also a python device over iio:
https://analogdevicesinc.github.io/pyadi-iio/devices/adi.ad936x.html

and an example can be found here:

analogdevicesinc.github.io/.../examples.html

Thank you!

I still have a problem, does the iio only run in Linux? Can I build it and run on Windows? I build it on Win10+Vivado2019.1, I install the IIO program, I do 'make run', the elf is successfully downloaded to the board, but the IIO program can not find any target.

You have to run make TINYIIOD=y run in order to buid it with iio support

You have to run make TINYIIOD=y run in order to buid it with iio support

Sure I run this command, I still can not connect the board and the IIO .

I use win10.

I use the Serial context, I dont know if it was the right choice.

On the board side you can check that the program is looping here:

https://github.com/analogdevicesinc/no-OS/blob/ab694563beedd92e28fa88b39f8fd5d074c1e39d/projects/ad9361/src/main.c#L792

If not, try to run make clean_all to remove the build directory and the build the project again.

If this was right, maybe is better to try at first to connect to the board with IIO Osciloscope. Here is the latest release.

You set the baudrate to 921600 and with your com port  and press refresh.

Then you should see the board.