JESD parameters issues

Hello Irfan,

Try to start from the example project on Github. This should work with Microblaze and include all the files needed. To build it use the no-OS wiki.

I think the parameters you seek are given value in the main file of the app, and to control the JESD you will use the drivers that are included in the project.

Does this help clarify things?

Regards,
Andrei.

Hello Andrei

the issue is i am facing with JESD errors and Lane errors.  may be my sync signal is not properly asserting. how to solve this error . the other things what you have told I understood and done according to that. 

Thanks and Regards,

Irfan

Are you using custom HDL or an ADI one? Note that if you are using ADI no-OS and HDL you need to use a matching pair of releases. For example the 2019_r1 branches for both.

Regards,
Andrei.

Hello

as i have stated earlier about my project,

i need some help regarding signal integrity and JESD synchronization.

i ran PRBS on the ad 9371 and FPGA KCU116 board and got a non-zero value so my question is how to solve this? and the JESD it goes to CGS phase but i am not sure whether it is going to the ILAS phase so how to make sure that it has successfully ran the CGS phase. in tera term it shows SYNC: desasserted and how to solve this error

your help is valuable to me.

Thanks

Irfan

Hi iirrffaann001@gmail.com

Sorry for letting this conversation dry, it got lost in the stack.

Did you fix your issue ? Do you still need help with this ?

Regards