I have tested the software in development successfully and now making my custom board.
In my custom board some changes are there so i have to regenerate the u-boot-spl. I have followed the instruction given in analog devices wiki but i am getting error in Altera ARM DS-5 tool.
I am using windows7 OS also.
Please help me to overcome this issue.
Hi anki, Sorry for letting the conversation dry out, we missed it somehow. Is this issue still relevant ?
Anki, I was referring that you can do a test by running Linux on your custom board. Since it's not exactly an ADI issue, maybe you should ask Altera for some help on their forum as well.
you are right but I wanted to know that weather 512MiB memory is sufficient for AD9361 No OS software?
J S Hyanki
Yes, much less is actually required - have a look here: https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz/software/baremetal#code_size_information
It is showing maximum size 100KB. Its really surprising why it is not working.
Only U-Boot-SPL change is making differences. I am replacing U-Boot-SPL in Dev board. It is not working when i am using U-Boot-SPL generated by me.
what to do, I am stucked badly?
here Altera people are not able to help also.
I am attaching message, FPGA design & AD9361 software is same. I am changing u-boot-spl only.
please see the message. left one is corect which is running
Should I follow all instructions for u-boot-spl
Or some of it?
Unfortunately, I don't know how to help you... u-boot-spl is generated by SoC Embedded Design Suite. Maybe you are using a different version.
I am using ds-5 , very 5.23