Microcontroller no-OS Drivers

Q&A

by TeamDGTL
Microcontroller no-OS Drivers

Latest 32 minutes ago by Cristianmihaipopa1601
238 2 0
Not Answered
Help required in capturing ADC data using AD9695_EVK with ZCU102 0
Not Answered

Greetings Sir, We are presently working on AD9695 with ZCU102, we are in testing stage, we have build vivado part from HDL repos available, and as you suggested we have used AD9208 no-os files for implementing Baremetel for AD9695 both using Xilinx2022_2...

Vivado 2022.2 software ad9695 ADC data capturing zcu102 Xilinx FPGA no-os ad9208 High Speed A/D Converters >10 MSPS JESD_configurations Standard High Speed A/D Converters Precision A/D Converters HDL_repositories Show More

238 2 0
by EmbdEng
Microcontroller no-OS Drivers

Latest 1 day ago by mandrica
202 4 0
Not Answered
How to change the sampling rate of FMCOMMS3 + ZCU104 (NO OS) 0
Not Answered

Hi, My setup is FMCOMMS3 + ZCU104. For HDL, I started from the FMCOMMS3 + ZCU102 and modified the HDL to suit ZCU104. For software, I am using no OS of AD9361 and I am using the DMA example. Again, I have modified the no OS to suit ZCU104. The default...

software ad9361 High Speed A/D Converters >10 MSPS 2024.1 Wideband Transceiver IC RF Integrated Transceivers Show More

202 4 0
by AnshuRaj
Microcontroller no-OS Drivers

Started 6 days ago
80 0 0
Not Answered
ADRV9371 + ZCU102 bare metal 0
Not Answered

Hi, I am working with ADRV9371+ ZCU102 FPGA board, I have used git hub HDL repo https://github.com/analogdevicesinc/hdl/blob/main/projects/adrv9371x/zcu102/system_top.v with respect to release 2023 branch, , build has been generated , after that i have...

hardware adrv9371 zcu102 ADRV9371 zcu102 bare metal control and configuration

80 0 0
by AnuragD
Microcontroller no-OS Drivers

Latest 8 days ago by danmois
214 6 0
Not Answered
ADRV9002 configuration files 0
Not Answered

Hi, Kindly Provide the configuration files for ADRV9002 for ZCU102 Evaluation board. For No OS driver implementation. Regards Anurag

software ADRV9002 Wideband Transceiver IC RF Integrated Transceivers

214 6 0
by fpga535
Microcontroller no-OS Drivers

Latest 11 days ago by JAlipio
228 3 0
Suggested Answer
AD9434 FMC on ZedBoard – DMA capture completed but sampled data seems incorrect 0
Suggested Answer

Hello, I am currently working on a project using a ZedBoard with an AD9434 FMC board and I am having an issue with the captured ADC data. I started this work by following the Analog Devices documentation available here: https://analogdevicesinc.github...

ad9434 software zedboard High Speed A/D Converters >10 MSPS Standard High Speed A/D Converters Precision A/D Converters Vitis 2023.2 AD9434BCPZ-370 Show More

228 3 0
by Vinnie003
Microcontroller no-OS Drivers

Latest 1 month ago by Vinnie003
109 2 0
Answered
Error While Running FMCOMMS3 with ZCU104 +1
Answered

Hello,I am trying to interface ZCU104 with FMCOMMS3 and i have ported the design as per the guide and also followed the no-OS guide https://wiki.analog.com/resources/no-os/build and i am trying to run the DMA_EXAMPLE as said in the https://wiki.analog...

hardware zcu102 no-os ad9361 Wideband Transceiver IC RF Integrated Transceivers Show More

109 2 0
by pointer
Microcontroller no-OS Drivers

Latest 1 month ago by SJagini
125 3 0
Not Answered
Using DAC - DMA in AD936x NO-OS to generate signal 0
Not Answered

Hello all, I am working with the AD936x No-OS reference design and trying to use the DAC–DMA path to generate a signal. So far, I have successfully used the BIST tone feature in the same AD936x No-OS system to generate a signal, which confirms that...

software Wideband Transceiver IC RF Integrated Transceivers

125 3 0
by rftoddler
Microcontroller no-OS Drivers

Latest 1 month ago by rftoddler
702 10 0
Not Answered
Ask about direct and indirect loopback on AD9081 0
Not Answered

I am trying to perform direct loopback and indirect loopback on AD9081 with ZCU102 and no-os driver. I have a few questions: 1. In direct loopback, since ADC output connect directly to DAC input, so we just need to make the AD9081_DAC_FREQUENCY and...

hardware software AD9081 jesd204b loopback latency High Speed A/D Converters >10 MSPS Mixed-Signal Front Ends (MxFE) AD9081_FMCA_EBZ Show More

702 10 0
by WilliamFpga
Microcontroller no-OS Drivers

Latest 1 month ago by John69
1337 44 0
Answered
Cannot reset ADRV9029 DPD when enable DPD Tracking Calibration 0
Answered

Hello, After bring up the ADRV9029 on our custom board, now we need to enable the DPD tracking calibration. I followed the DPD Tracking Calibration Bring Up Sequence (UG1727) but stuck at the adi_adrv9025_DpdReset function. The log is: ERROR: Error...

software no-os ADRV9029 R2023_2 Wideband Transceiver IC RF Integrated Transceivers Show More

1337 44 0
by cquptgy
Microcontroller no-OS Drivers

Latest 1 month ago by danmois
64 1 1
Not Answered
ADRV9002/3 NO-OS multi chip problems 0
Not Answered

[ERROR]: Error number 3 (0x00000003), Recovery action -101.In file ../noos/drivers/rf-transceiver/navassa/devices/adrv9001/public/src/adi_adrv9001_arm.c, in function adi_adrv9001_arm_CmdStatus_Wait, in line 671, variable name device.Error message ArmCmdStatusWait...

ADRV9002 Rev 12.0 software Firmware 0.21.0.9 API version: 68.0.6 Wideband Transceiver IC RF Integrated Transceivers Show More

64 1 1
by FaroukA
Microcontroller no-OS Drivers

Latest 1 month ago by CapotaBianca
603 7 0
Answered
ADRV9026 no-OS project for ZCU102 on Windows (Vitis 2025.1) Error [PLM-2]/[PLM-3] +1
Answered

Hello, I am trying to build the ADRV9026 no-OS example project for the ZCU102 platform on Windows using Vitis 2025.1 . I successfully built the HDL reference design and generated the bitstream ( .xsa and .bit files). Followed the official...

ADRV9026 software adrv9026 + ZCU102 HDL no -OS reference design Vitis 2025.1 Vivado 2025.1 Wideband Transceiver IC RF Integrated Transceivers Show More

603 7 0
by hsin0606
Microcontroller no-OS Drivers

Latest 1 month ago by rnechita
80 1 0
Not Answered
AD-JUPITER-EBZ NO-OS external clock settings 0
Not Answered

I am currently developing SDR using AD-JUPITER-EBZ for FreeRTOS project. However, the rx_frequency_offset_corrections cannot correct the large RX frequency offset. Under Kuiper Linux, I can modify the clock mux from device tree and configure the clock...

no-os project AD-JUPITER-EBZ hardware external clock

80 1 0
by ElliotWave
Microcontroller no-OS Drivers

Latest 1 month ago by elenahadarau
910 6 0
Answered
Continuous ADC data streaming from PL to PS (standalone - NO-OS) +1
Answered

Hi, I facing issue with ADI AXI DMAC - data is lost between two transaction even though the FIFO size is sufficient and writing clock is slow. I want to continuously stream the data from PL to PS using AXI DMAC, the data will further be sent on Ethernet...

adc hardware software dmac standalone noos VITIS Simultaneous Sampling A/D Converters ad7768 vivado Precision A/D Converters axi fifo Show More

910 6 0
by scallaway
Microcontroller no-OS Drivers

Latest 2 months ago by archi
1144 6 2
Answered
TMC9660 TMC API Not out yet +3
Answered

Hello, I am planning on doing some development with the TMC9660 motor controller and driver and was wondering when the API for this specific IC would come out https://github.com/analogdevicesinc/TMC-API/tree/master/tmc/ic , it appears to not be here...

software api TMC9660 TMC4671 driver Motion and Interface Controller Show More

1144 6 2
by UVLSIDRIVER
Microcontroller no-OS Drivers

Latest 2 months ago by travisfcollins
283 6 0
Answered
Issue: [Labtools 27-3361] Debug Hub Not Detected After Switching AD9361 to 1T1R Mode +1
Answered

Hi, I am working with an AD9361 connected to a Zynq XC7Z045 board. In my initial setup, I used the standard 2T2R configuration with a sampling rate of 61.44 MSPS , and the system was functioning correctly — I was able to capture and transmit data successfully...

software vivado 2017.4 microcontroller no-os ad9361 Wideband Transceiver IC RF Integrated Transceivers Show More

283 6 0

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Latest Webinars

Challenge Yourself!

What's Brewing

Places

Resources

Highlighted Blogs

Latest Blogs

ADI Blogs

Visit ContentZone

Featured Content

View Content By Industry

View Content By Technology

Q&A

Not Answered
Help required in capturing ADC data using AD9695_EVK with ZCU102 0
Not Answered

Not Answered
How to change the sampling rate of FMCOMMS3 + ZCU104 (NO OS) 0
Not Answered

Not Answered
ADRV9371 + ZCU102 bare metal 0
Not Answered

Not Answered
ADRV9002 configuration files 0
Not Answered

Suggested Answer
AD9434 FMC on ZedBoard – DMA capture completed but sampled data seems incorrect 0
Suggested Answer

Answered
Error While Running FMCOMMS3 with ZCU104 +1
Answered

Not Answered
Using DAC - DMA in AD936x NO-OS to generate signal 0
Not Answered

Not Answered
Ask about direct and indirect loopback on AD9081 0
Not Answered

Answered
Cannot reset ADRV9029 DPD when enable DPD Tracking Calibration 0
Answered

Not Answered
ADRV9002/3 NO-OS multi chip problems 0
Not Answered

Answered
ADRV9026 no-OS project for ZCU102 on Windows (Vitis 2025.1) Error [PLM-2]/[PLM-3] +1
Answered

Not Answered
AD-JUPITER-EBZ NO-OS external clock settings 0
Not Answered

Answered
Continuous ADC data streaming from PL to PS (standalone - NO-OS) +1
Answered

Answered
TMC9660 TMC API Not out yet +3
Answered

Answered
Issue: [Labtools 27-3361] Debug Hub Not Detected After Switching AD9361 to 1T1R Mode +1
Answered

Q&A

Not Answered Help required in capturing ADC data using AD9695_EVK with ZCU102 0 Not Answered

Not Answered How to change the sampling rate of FMCOMMS3 + ZCU104 (NO OS) 0 Not Answered

Not Answered ADRV9371 + ZCU102 bare metal 0 Not Answered

Not Answered ADRV9002 configuration files 0 Not Answered

Suggested Answer AD9434 FMC on ZedBoard – DMA capture completed but sampled data seems incorrect 0 Suggested Answer

Answered Error While Running FMCOMMS3 with ZCU104 +1 Answered

Not Answered Using DAC - DMA in AD936x NO-OS to generate signal 0 Not Answered

Not Answered Ask about direct and indirect loopback on AD9081 0 Not Answered

Answered Cannot reset ADRV9029 DPD when enable DPD Tracking Calibration 0 Answered

Not Answered ADRV9002/3 NO-OS multi chip problems 0 Not Answered

Answered ADRV9026 no-OS project for ZCU102 on Windows (Vitis 2025.1) Error [PLM-2]/[PLM-3] +1 Answered

Not Answered AD-JUPITER-EBZ NO-OS external clock settings 0 Not Answered

Answered Continuous ADC data streaming from PL to PS (standalone - NO-OS) +1 Answered

Answered TMC9660 TMC API Not out yet +3 Answered

Answered Issue: [Labtools 27-3361] Debug Hub Not Detected After Switching AD9361 to 1T1R Mode +1 Answered

Not Answered
Help required in capturing ADC data using AD9695_EVK with ZCU102 0
Not Answered

Not Answered
How to change the sampling rate of FMCOMMS3 + ZCU104 (NO OS) 0
Not Answered

Not Answered
ADRV9371 + ZCU102 bare metal 0
Not Answered

Not Answered
ADRV9002 configuration files 0
Not Answered

Suggested Answer
AD9434 FMC on ZedBoard – DMA capture completed but sampled data seems incorrect 0
Suggested Answer

Answered
Error While Running FMCOMMS3 with ZCU104 +1
Answered

Not Answered
Using DAC - DMA in AD936x NO-OS to generate signal 0
Not Answered

Not Answered
Ask about direct and indirect loopback on AD9081 0
Not Answered

Answered
Cannot reset ADRV9029 DPD when enable DPD Tracking Calibration 0
Answered

Not Answered
ADRV9002/3 NO-OS multi chip problems 0
Not Answered

Answered
ADRV9026 no-OS project for ZCU102 on Windows (Vitis 2025.1) Error [PLM-2]/[PLM-3] +1
Answered

Not Answered
AD-JUPITER-EBZ NO-OS external clock settings 0
Not Answered

Answered
Continuous ADC data streaming from PL to PS (standalone - NO-OS) +1
Answered

Answered
TMC9660 TMC API Not out yet +3
Answered

Answered
Issue: [Labtools 27-3361] Debug Hub Not Detected After Switching AD9361 to 1T1R Mode +1
Answered