Locale Icon
English
  • Forums

    Popular Forums

    • LTspice
    • Video
    • Power Management
    • RF & Microwave
    • Precision ADCs
    • FPGA Reference Designs

    Product Forums

    • Amplifiers
    • Clocks & Timers
    • Data Converters
    • Direct Digital Synthesis (DDS)
    • Energy
    • Interface and Isolation
    • MEMS Inertial Sensors
    • Power Management
    • Processors & DSP
    • Processors & Microcontrollers
    • Switches & Multiplexers
    • Sensors
    • Voltage References
    View All

    Application Forums

    • A2B Audio Bus
    • Audio
    • Automated Test Equipment (ATE)
    • Condition-Based Monitoring
    • Depth, Perception & Ranging Technologies
    • LiDAR Solutions
    • Motor Control Hardware Platforms
    • Speech Processing Solutions
    • Video

    Design Center Forums

    • ACE Evaluation Software
    • ADEF System Platforms
    • Design Tools & Calculators
    • FPGA Reference Designs
    • Linux Software Drivers
    • Microcontroller no-OS Drivers
    • Precision Studio
    • Power Studio Designer
    • Power Studio Planner
    • Reference Designs
    • Robot Operating System (ROS) SDK
    • Signal Chain Designer
    • Software Interface Tools
  • Learn

    Highlighted Webinar

    Power Integrity for High Performance Measurement Systems

    Increasing data rates driven by AI workloads and the evolution from 5G to emerging 6G standards are placing new demands on electronic test and measurement...

    Places

    • ADI Academy
    • ADI Webinars
    • EZ Blogs
    • Video Annex
    • Virtual Classroom

    Libraries

    • 3D ToF Depth Sensing Library
    • Continuous-Wave CMOS Time of Flight (TOF) Library
    • Embedded Vision Sensing Library
    • Gigabit Multimedia Serial Link (GMSL) Library
    • Optical Sensing Library
    • Other Products Library
    • Precision Technology Signal Chains Library
    • Software Modules and SDKs Library
    • Supervisory Circuits Library
    • Wireless Sensor Networks Library

    Upcoming Learning & Events

    • Humanoid Robotics: Deterministic Motion Control & Edge AI Systems
    View All Webinars
  • Community Hub

    Challenge Yourself!

      KCC Quizzes AQQ302 about Bang Gap Reference Generation

      1.Quote of the month: "People Who Say They Sleep Like a Baby usually don't have one" - unknown 2. New quiz AQQ302 about Band Gap Reference Voltage...

    View All

    What's Brewing

      Read the Blog:  Simplified I/O: One Chip, Flexible Voltage Output, Take this Quiz for Another Chance to Win a Gift Card!

      Important: Read the blog first . The quiz questions are all based on the content of the blog: Simplified I/O: One Chip, Flexible Voltage Outpu...

    View All

    Places

    • Community Help
    • Analog Dialogue Quiz
    • Logic Lounge
    • Super User Program

    Resources

    • EZ Code of Conduct
    • EZ How To Help Articles
    • Getting Started Guide
    • ADI: Words Matter
    • Community Help Videos
    View All
  • ContentZone

    Visit ContentZone

    Search content by industry or technology.
    • Blogs
    • Technical Articles
    • Tutorials
    • Videos
    • Webinars
    Your ADI content all in one place.
    View ContentZone

    The Latest Read

    JESD204 Bring-Up: From Link-Up to Data Integrity

    This blog presents a structured bring-up methodology for the ZCU102 + ADRV9009 platform, stepping through each initialization phase in sequence and identifying...

    New Release

    Using the Industrial I/O Framework for Easy Prototyping of Software Defined Radio (SDR) Transceivers
    Using the Industrial I/O Framework for Easy Prototyping of Software Defined Radio (SDR) Transceivers

    Introduction to Industrial I/O, libIIO, and Python software tools

    Recent Technical Insights

    Latest Technical Article from Analog.com
    Evaluating Power Supplies with Different Compensation Settings

    Evaluating Power Supplies with Different Compensation Settings

EngineerZone
EngineerZone
MEMS Inertial Sensors
  • Log In
  • User
  • Site
  • Search
OR
Ask a Question
MEMS Inertial Sensors
MEMS Inertial Sensors
Documents ADXL362: Output Data Rates (ODR)
  • Q&A
  • Files
  • FAQs/ Docs
  • Members
  • Tags
  • Cancel
  • +Documents
  • +3-D Model/STEP: FAQ
  • +AD22282-A-R2: FAQ
  • +ADIS16000: FAQ
  • +ADIS16003 MTBF: FAQ
  • +ADIS16006: FAQ
  • +ADIS16201: FAQ
  • +ADIS16203: FAQ
  • +ADIS16204: FAQ
  • +ADIS16209: FAQ
  • +ADIS16210: FAQ
  • +ADIS16223: FAQ
  • +ADIS16227: FAQ
  • +ADIS16228: FAQ
  • +ADIS16229: FAQ
  • +ADIS16240: FAQ
  • +ADIS16255: FAQ
  • +ADIS16355: FAQ
  • +ADIS16364: FAQ
  • +ADIS16365: FAQ
  • +ADIS16375: FAQ
  • +ADIS16385: FAQ
  • +ADIS16400: FAQ
  • +ADIS16405: FAQ
  • +ADIS16407: FAQ
  • +ADIS16445: FAQ
  • +ADIS16448: FAQ
  • +ADIS16460: FAQ
  • +ADIS16475: FAQ
  • +ADIS16477: FAQ
  • +ADIS1647x: FAQ
  • +ADIS16480: FAQ
  • +ADISUSB: FAQ
  • +ADXL001: FAQ
  • +ADXL203: FAQ
  • +ADIS16300: FAQ
  • +ADIS16485: FAQ
  • +ADIS16488: FAQ
  • +ADIS16488A: FAQ
  • +ADIS16490: FAQ
  • +ADIS16495: FAQ
  • +ADIS16497: FAQ
  • +ADXL103: FAQ
  • +ADXL150: FAQ
  • +ADxL193: FAQ
  • +ADXL202: FAQ
  • +ADXL206: FAQ
  • +ADXL210: FAQ
  • +ADXL210E: FAQ
  • +ADXL213: FAQ
  • +ADxL230: FAQ
  • +ADXL278: FAQ
  • +ADXL312: FAQ
  • +ADXL313: FAQ
  • +ADXL320: FAQ
  • +ADXL321: FAQ
  • +ADXL322: FAQ
  • +ADXL327: FAQ
  • +ADXL335: FAQ
  • +ADXL337: FAQ
  • +ADXL345: FAQ
  • +AD22290: FAQ
  • +ADIS16003: FAQ
  • +ADIS16133: FAQ
  • +ADIS16135: FAQ
  • +ADIS16265: FAQ
  • +ADIS16305: FAQ
  • +ADXL326: FAQ
  • +ADXL350: FAQ
  • -ADXL362: FAQ
    • ADXL362 + Arduino: Using Interrupts to Implement Motion-Activated Sleep
    • ADXL362 200Hz Bandwidth
    • ADXL362 Arduino How-To
    • ADXL362 as a Motion Switch
    • ADXL362 Clock Accuracy
    • ADXL362 Current Usage versus Competitors
    • ADXL362 Evaluation Boards
    • ADXL362 External Sync Pin
    • ADXL362 FIFO
    • ADXL362 FIFO Advantages
    • ADXL362 footprint error in datasheet (Rev C)
    • ADXL362 Motion Status Indicator Pin
    • ADXL362 register configuration
    • ADXL362 Self Test Procedure
    • ADXL362 Target Applications
    • ADXL362 Wakeup Mode vs. Full Power Mode
    • ADXL362  advantages as a motion switch
    • ADXL362: Acceleration beyond measurement range
    • ADXL362: Accessing real-time data in Wakeup Mode
    • ADXL362: autosleep mode
    • ADXL362: Bare minimum to acquire data
    • ADXL362: Output Data Rates (ODR)
    • ADXL362: Wakeup Mode and Autosleep
    • ADXL362: Wider bandwitdh than 200Hz
    • Are customers parts close to the ADXL362
    • EVAL-ADXL362Z-MLP threshold setting
    • Evaluating the ADXL362
    • Is ADXL362 data AC coupled?
    • Is ultrasonic welding a suitable assembly process for ADXL362 ?
    • Logging Data Prior to an Event
    • ADXL362 Blinky Demo
    • How to use the ADXL362 to eliminate a power switch and control system power
  • +ADXL375: FAQ
  • +ADXL377: FAQ
  • +ADXL78: FAQ
  • +ADXRS150: FAQ
  • +ADXRS290: FAQ
  • +ADXRS300: FAQ
  • +ADXRS401: FAQ
  • +ADXRS453: FAQ
  • +ADXRS610: FAQ
  • +ADxRS614: FAQ
  • +ADXRS623: FAQ
  • +ADXRS646: FAQ
  • +ADXRS652: FAQ
  • +ADXRS800: FAQ
  • +ADIS16136: FAQ
  • +ADIS16137: FAQ
  • +ADIS16266: FAQ
  • +ADIS16334: FAQ
  • +ADIS16362 Evaluation Tool: FAQ
  • +ADIS16364 Evaluation Tool: FAQ
  • +ADIS16367: FAQ
  • +ADIS163xx: FAQ
  • +ADIS16489: FAQ
  • +ADIS1648x: FAQ
  • +ADXL346: FAQ
  • +ADXL363: FAQ
  • +EVAL-ADIS: FAQ
  • +EVAL-ADIS2: FAQ
  • +Filtering Functions: FAQ
  • +General: FAQ
  • +Gyroscope: FAQ
  • +Hard & Soft Iron Correction: FAQ
  • +ISEB USB: FAQ
  • +IMU: FAQ
  • +MEMS: FAQ
  • +Slip Ring Interface: FAQ
  • +SPI Troubleshooting: FAQ
  • +TEMP_OUT Variation: FAQ
  • +Test Procedures: FAQ
  • +AD590: FAQ
  • +AD5940: FAQ
  • +AD5941: FAQ
  • +AD595: FAQ
  • +AD8495: FAQ
  • +AD8497: FAQ
  • +ADAF1080-3EBZ, ADAF1080, ADAF1080: FAQ
  • +ADIS16IMU2 FAQ:
  • +ADMT4000: FAQ
  • +ADUCM355: FAQ
  • +ADXL343: FAQ
  • +ADXL357: FAQ
  • +ADXL367: FAQ
  • +ADXL372: FAQ
  • +ADXRS645 : FAQ
  • +Breakout Board FAQ:
  • +CN0429: FAQ
  • DS1922E: FAQ
  • +DS1922L: FAQ
  • +DS1922T: FAQ
  • +DS1923: FAQ
  • +EVAL-ADAF1080-3EBZ, ADAF1080: FAQ
  • +EVAL-ADXL312-SDP: FAQ
  • +IMU/Gryoscope Alignment FAQ:
  • +iSensor FAQ:
  • +MAX30001: FAQ
  • +MAX30003: FAQ
  • +MAX30003CTI+: FAQ
  • +MAX30003WING: FAQ
  • +MAX30009EVKIT: FAQ
  • +MAX30134EVSYS: FAQ
  • +MAX9621: FAQ
  • +TMP01: FAQ
  • +Wireless Vibration Sensors FAQ:

ADXL362: Output Data Rates (ODR)

Q 

Can I achieve data rates (ODRs) other than the ones provided by the register
settings?

 

A 

Other ODRs can be achieved by providing an external clock at a frequency lower
than the nominal frequency. The ODR will scale by the ratio of the external
clock to the nominal clock.

Tags: ADXl362
  • Share
  • History
  • More
  • Cancel
 
Related Content
  • ADXL362: Output Data Rates (ODR)
    EngineerZone
    Question Can I achieve data rates (ODRs) other than the ones provided by the register settings? Answer Other ODRs can be achieved by providing an external clock at a frequency lower than the nominal...
  • Referring to ADXL362
    acj27
    I see that ODR can be set in the FILTER_CTL register (Address 0x2C), and the device provides a discrete # of options for ODR. Setting to 25Hz, I'm s eeing ~15% lower ODR than the nominal setting. Is this...
  • ADXL362 External Sync Pin
    GenevaC
    Q Why would a customer want the External SYNC pin and how would they use it? A The ADXL362 has a built-in clock that serves as the basis for all internal timing, including sampling acceleration...
 
Related Content
  • ADXL362: Output Data Rates (ODR)
    EngineerZone
    Question Can I achieve data rates (ODRs) other than the ones provided by the register settings? Answer Other ODRs can be achieved by providing an external clock at a frequency lower than the nominal...
  • Referring to ADXL362
    acj27
    I see that ODR can be set in the FILTER_CTL register (Address 0x2C), and the device provides a discrete # of options for ODR. Setting to 25Hz, I'm s eeing ~15% lower ODR than the nominal setting. Is this...
  • ADXL362 External Sync Pin
    GenevaC
    Q Why would a customer want the External SYNC pin and how would they use it? A The ADXL362 has a built-in clock that serves as the basis for all internal timing, including sampling acceleration...
analog-devices logo

About Analog Devices

  • Who We Are
  • Careers
  • Newsroom
  • What We Do (Signals+)
  • Investor RelationsExternalLink
  • Quality & Reliability
  • Sales and Distribution
  • What's New on Analog.com
  • Contact Us

Find Help

  • Support
  • Resources
  • WikiExternalLink
  • Analog Dialogue
  • ADI Developer PortalExternalLink

myAnalog

Interested in the latest news and articles about ADI products, design tools, training, and events?

Go to myAnalog
  • Instagram page
  • Twitter page
  • Linkedin page
  • Youtube page
  • Facebook
  • Legal and Risk
  • Accessibility
  • Privacy Policy
  • Privacy Settings
  • Cookie Settings

©2026 Analog Devices, Inc. All Rights Reserved

analog-devices

About Analog Devices

Down Up
  • Who We Are
  • Careers
  • Newsroom
  • What We Do (Signals+)
  • Investor RelationsExternalLink
  • Quality & Reliability
  • Sales and Distribution
  • What's New on Analog.com
  • Contact Us

Find Help

Down Up
  • Support
  • Resources
  • WikiExternalLink
  • Analog Dialogue
  • ADI Developer PortalExternalLink

myAnalog

Interested in the latest news and articles about ADI products, design tools, training, and events?

Go to myAnalog
Instagram page Facebook Twitter page Linkedin page Youtube page
  • Legal and Risk
  • Accessibility
  • Privacy Policy
  • Privacy Settings
  • Cookie Settings

©2026 Analog Devices, Inc. All Rights Reserved