For those of your who have evaluated the ADIS16334/PCBZ, ADIS16445/PCBZ or ADIS16448/PCBZ, you have an extra tool available for evaluating the newly released ADIS16460 on your EVAL-ADIS system. If you replace the connector on the flex cable, with the CLM-107-02-F-D (Samtec) in a manner that reflects the pictures below, you can connect the ADIS16460 directly to J4 on the EVAL-ADIS, without having to use an ADIS16IMU4/PCBZ. Please note that this modification is not something that we can supply at this time, but for those who have the ability to desolder and solder these types of components, this is a relatively simple operation. Good luck with this!