ADIS16480 gyro issue

I'm trying to read the gyro_x  OUT and LOW registers, but there is an awkward problem. There are continuous variable values unless the ADIS16480 has a fixed position without varying it.

I tried also to read the pitch, roll, and yaw, The values were good but there are some dropped readings.

I'm using the breakout board.

Any help!

Parents
  • Dear NevadaMark,
    Thank you for your kind response.
    Sorry for not explaining the issue in a proper manner. I tried to check the gyro_x values using the evaluation board and IMU Evaluation software and the results were suffiecient.
    But when reading using the break out board with my arm_cortex based board the gyro_x readings drift, and some readings dropped.

    So I have two questions to ask:
    1- What is the reason for dropping readings in gyro?
    2- Why did the gyro readings drift ?

Reply
  • Dear NevadaMark,
    Thank you for your kind response.
    Sorry for not explaining the issue in a proper manner. I tried to check the gyro_x values using the evaluation board and IMU Evaluation software and the results were suffiecient.
    But when reading using the break out board with my arm_cortex based board the gyro_x readings drift, and some readings dropped.

    So I have two questions to ask:
    1- What is the reason for dropping readings in gyro?
    2- Why did the gyro readings drift ?

Children
No Data