Just purchased and received an ADISUSBZ and ADIS16362 module. Utilizing IMU_6DOF (Ver 3.0) I do not see any changes on the Gyro plot display. All plot axis, for the Gyro, are enabled. The accelerometer plot display, with similar settings, works great. Any suggestions?
Based on what you shared with us, it sounds like JP1 is connected to +3.3V, when it needs to be connected to the +5V setting. For more information on this part of the setup process, check out the pictures under Step #3 of the Wiki Guide's Physical Setup section:
If this solves the problem for you, can you mark this post with the Correct Answer designation? Our system administrators would greatly appreciate it. If not, let me know and we can help identify the next thing to look at.
I hope that helps!
I just wanted to check back in on this. Look forward to your confirmation (correct answer) or further information if this suggestion does not work.
We are going to mark this as answered, but are happy to discuss if you have any future questions. Good luck!