Device Features

Manh, thank you for your inquiry. Mentioning cn1 and LVickery for assistance. - Geneva

Hello Manh,

I am linking to another recent thread here with a very similar question, perhaps the same use case? If not then please provide some more details on the application and I can assist.

(+) Q19209C // Magnetic field strength and polarity - Q&A - MEMS Inertial Sensors - EngineerZone

In brief, yes this product can achieve what you ask. I would recommend the EVAL-ADAF1080SDZ evaluation board for this application for early measurements and feasibility. EVAL-ADAF1080 Evaluation Board | Analog DevicesEVAL-ADAF1080 Evaluation Board | Analog Devices there is detailed information in the userguide that should help you get a quick start with measurements.

Regards,

Luke

Hello Lvickery

For the new product you are offering, please provide the following information:
1. Input power
2. Is there any analog output signal
3. Does this product have a magnet contact meter
4. What is the magnetic field value threshold

Hi Manh,

The relevant information for the ADAF1080 sensor can be found in the datasheet here: ADAF1080 Datasheet and Product Info | Analog Devices.

For the EVAL-ADAF1080SDZ there is a userguide on the evaluation board page here: EVAL-ADAF1080 Evaluation Board | Analog Devices

1: Input power is 5V

2: Yes there is analog output voltage available which is proportional to the magnetic field strength, details of pinout are in the userguide

3: I am not sure what you mean by magnet contact meter. The ADAF1080 will produce an output voltage proportional to magnetic field strength. There is no output indicating physical contact with a magnet.

4: +/- 8mT on sensitive axis