Post Go back to editing

ADIS16488

When I install the USB connection programs for the ADIS16488 and ADIS16495 at the same time, why can't the respective software be opened at the same time to record data?

  • Thank you for posting your question in this forum!  

    Can you please provide more details on your setup? 

    1. Which evaluation platform are you using (EVAL-ADIS2 or EVAL-ADIS-FX3?)
    2. Which version of the software are you using?

    Generally speaking, our tools have been developed to evaluate 1 IMU at a time, but based on what I have been told, the new platform (EVAL-ADIS-FX3) can support two different platforms, at a time.  I look forward to your response. 

  • 1. We want to use two IMUs at the same time, use EVAL-ADIS2 to connect to ADIS16488, and use EVAL-ADIS-FX3 to connect to ADIS14695, but when I connect ADIS16495, when I connect ADIS16488, it prompts that the USB connection version is too low , unable to connect.
    2. Does the software of ADIS16495 only support one window to be opened? In the following interface, why can't the output data of 16495 output Scale Data? Or how to output Scale Data?

  • Thank you for sharing this with us. I suspect that we might want to see if we can use EVAL-ADIS-FX3Z for both of them, but let me see what I can find out.  This might take a few days, as I am working remotely and might not have the tools that I need to try this out, quickly.  

  •  If you have a moment, can you let me know if there is any limitations that you are aware of, if we want to run 2 EVAL-ADIS-Fx3Z platforms on one PC, at the same time?  I will try this out at my location, but would value your counsel, if you happen to see this. Thank you! 

  • thanks,Look forward to your reply。

  • We have two Imus, adis16488 and adis16495. At the same time, we need to install the corresponding USB connection programs, eval-adis2 and eval-adis-fx3. When we are all installed, I use IMU_ Evaluation_ 1_ 18_ 22_ When public connects adis16488, it reminds me that the version of USB connection program is too low, which is the above situation.

  • Sorry for the delay in response.

    I am not aware of any issue using multiple EVAL-ADIS-FX3 boards on the same host PC. This is actually a configuration we use routinely in the lab. I have less experience using an EVAL-ADIS-FX3 on the same PC as an EVAL-ADIS-2, but generally it should not be an issue. If your PC has multiple USB controllers, perhaps try connecting only a single eval board to each?

    Also, can you confirm that the "USB Connection" error coming from the Windows driver, not the IMU eval application?

  • Hello,

    Currently the register logging application logs signed data only, which must be post processed to meaningful units. I will evaluate the possibility of adding a "Scaled Data" option to this interface for the next release.

    Thanks,

    Alex