ADAS1000
Recommended for New Designs
The ADAS1000 measures electro
cardiac (ECG) signals, thoracic impedance, pacing artifacts,
and lead-on/lead-off status and output this information in the...
Datasheet
ADAS1000 on Analog.com
Hi,
We have a customer who is designing the ECG devices but there is a requirement on the CMRR (Balanced) of > 120dB at mains frequency, with patient cable. Can ADAS1000 perform such a CMRR requirement? If not, is there any work around using other supporting chipsets and ADAS1000?
Thanks.
stephenv - Moved from Other Products (EN) to MEMS Inertial Sensors. Post date updated from Monday, December 12, 2011 7:08 AM UTC to Tuesday, February 3, 2026 8:58 PM UTC to reflect the move.
Hi Taylor-
For an immediate response, I would suggest contacting the Analog Devices Customer Interaction Center in your region. You can find your local interaction center listed at: http://www.analog.com/en/content/technical_support_page/fca.html.
Regards,
Andy
Hi Taylor-
For an immediate response, I would suggest contacting the Analog Devices Customer Interaction Center in your region. You can find your local interaction center listed at: http://www.analog.com/en/content/technical_support_page/fca.html.
Regards,
Andy