RX and TX Bbf3dBCorner

DamienL said:

What is the Bbf3dBCorner limit for both RX and TX?

The 3dB corner limit for Tx and Rx will be based on the profile configuration used .

Below is an example when TX and RX sampling rate is of 122.88Msps , the 3dB corner response will be as shown below .

TX filter response:

For RX filter response:

Install the AD9375 GUI from below link to understand on the response for the desired configuration.

https://www.analog.com/en/lp/001/transceiver-evaluation-software.html

For the Filter wizard rules , please check the below link.

https://wiki.analog.com/resources/eval/user-guides/mykonos/software/filters

Irrespective of DPD when The TX RF synthesis BW should be greater than 20MHz and less than 240MHz.

DamienL said:

For RX, with a sampling rate of 44.8 MHz, is the RX limit 17.92 MHz?

For TX, is the limit equal to the Tx RF (Synthesis) bandwidth limit of 20 MHz? Or, if we do not use the DPD, is it possible to go down to 10 MHz?

Do you want to understand on the 3dB corner frequency or the bandwidth limitation here?